+254 06430320, +254 20 2069349 ,+254 61 2309217 library@must.ac.ke

Course Materials | BSc in BioSystems and Environmental Engineering

PRINT BOOKS

 

Calculus

  1. Edwards, C. H., Penney, D. E., & Edwards, C. H. (2002). Calculus: Early transcendentals: matrix version (6th ed). Prentice Hall.
  2. Gillett, P. (1981). Calculus and analytic geometry. D.C. Heath and co.
  3. Hass, J., Weir, M. D., & Thomas, G. B. (2009). University calculus. Pearson Education.
  4. Hunt, R. A. (1988). Calculus with analytic geometry. Harper & Row.
  5. Stewart, J. (2008a). Calculus (Custom Edition). Cengage Learning.
  6. Stewart, J. (2008b). Calculus: Early transcendentals (Enhanced webassign edition). Cengage Learning.
  7. Stewart, J. (2012a). Calculus: Early transcendentals. Cengage Learning.
  8. Stewart, J. (2012b). Calculus: Early trascendentals (7th ed). Brooks/Cole.
  9. Swokowski, E. W. (1991). Calculus of a single variable. PWS-KENT Pub. Co.
  10. Washington, A. J. (1972). An introduction to calculus with applications. Cummings Pub. Co.
  11. Weir, M. D., Hass, J., Giordano, F. R., & Finney, R. L. (2005). Thomas’ calculus (11th ed). Pearson Addison Wesley.

 

 

 

HIV/AIDS

  1. Berer, M., & Ray, S. (1993). Women and HIV/AIDS: An international resource book: information, action, and resources on women and HIV/AIDS, reproductive health, and sexual relationships. Pandora.
  2. HIV/AIDS: The challenge for tertiary institutions in Namibia. (2000). University of
  3. International Institute for Educatinal Planning & UNESCO (Eds.). (2003). HIV/AIDS and education: A strategic approach. International Institute for Educatinal Plannin
  4. Kenya Episcopal Conference (Ed.). (2000). HIV/AIDS: Manual for facilitators/trainers. Paulines Publications Africa.
  5. Magambo, J. K. (2003). Lecture notes on HIV/AIDS.
  6. Nyaga, R. K., & Kimani, D. N. et al. (2004). HIV/AIDS in Kenya: A review of research and policy issues. KIPPRA.
  7. Public Media Centre & Ford Foundation (Eds.). (1994). Aids stigma and discrimination: The attitudes of national experts adn influentials. Public Media Centre.
  8. Sax, P. E. et al, Cohen, C. J., & Kuritzkes, D. R. (2013). HIV essentials (6th ed.). Jones and Bartlett Learning.
  9. Wolters Kluwer (Ed.). (2001). Manual of HIV therapeutics second edition (2nd ed). Lippincott Williams and Wilkins.

 

Introduction to Computer application

  1. Barber, D. (2012). Bayesian reasoning and machine learning. Cambridge University Press.
  2. FitzGerald, J., Dennis, A., & Durcikova, A. (2015). Business data communications and networking (12th ed). John Wiley and Sons.
  3. Floyd, T. L. (2007). Electronics fundamentals (7th ed.). Pearson Education, Inc.
  4. Kumari, R. (2002). Computers and their applications to chemistry. Alpha Science International.
  5. Stallings, W. (2011). Network security essentials (4th ed.). Pearson Educational.
  6. Verts, W. T. (2014). Computer literacy workbook: 2014-2015 vol.2 applications (21st ed). Kendall hunt.

 

Algebra

  1. (2009). Introductory and intermediate algebra for college students (custom ed). Custom publishing.
  2. Blitzer, R. (2010a). College algebra: An early functions approach (2nd custom ed). Pearson learning solutions.
  3. Blitzer, R. (2010b). College algebra essentials (3rd ed). Prentice Hall.
  4. Cho, I. (2014). Algebras, graphs and their applications. CRC Press Inc.
  5. College algebra: Graphs and models (3rd ed). (2006). Pearson Addison Wesley.
  6. Kohn, E., & Herzog, D. A. (2001). Algebra II. Wiley.
  7. Lay, D. C. (2003). Linear algebra (2nd ed). Pearson Custom Pub.
  8. Leff, L. S. (2007). Let’s review. Integrated algebra. Barron’s.
  9. Lipschutz, S., & Lipson, M. (2005). Schaum’s outline of theory and problems of linear algebra (3rd ed). Tata McGraw-Hill.
  10. Martin-Gay, E. (2009). Beginning and intermediate algebra (4th ed). Pearson Prentice Hall.
  11. Martin-Gay, K. E. (2005). Beginning algebra (4th ed). Prentice Hall.
  12. Murdoch, D. C. (1970). Linear algebra [David Murdoch]. John Wiley and Sons.
  13. Personal Academic Notebook (Ed.). (2004). Interactive mathematics-Elementary algebra. Plato Learning.
  14. Sullivan, M. (2008). College algebra (custom ed). Prentice Hall.
  15. Williams, G. (2011). Linear algebra with applications. Jones and Barnett.

 

Physical and Inorganic Chemistry for Engineers

  1. Ameta, K. L., & Dandia, A. (Eds.). (n.d.). Green Chemistry: Synthesis of Bioactive Heterocycles (1st ed. 2014).
  2. Atkins, P. et al, & de Paula, J. (2006). Atkins’ Physical chemistry (8th ed.). Oxford University Press.
  3. Atkins, P., & de Paula, J. (2014). Atkins’ Physical chemistry (10th ed). Oxford University Press.
  4. Atkins, P. W., De Paula, J., & Keeler, J. (2018). Atkins’ Physical chemistry (International edition). Oxford University Press.
  5. Burrows, A. (Ed.). (2009). Chemistry3: Introducing inorganic, organic and physical chemistry. Oxford University Press.
  6. Burrows, A., John Holman, Gwen Pilling, & Andrews Parsons. (2009a). Chemistry: Introducing inorganic and physical chemistry. Oxford University Press.
  7. Burrows, A., John Holman, Gwen Pilling, & Andrews Parsons. (2009b). Chemistry: Introducing inorganic and physical chemistry. Oxford University Press.
  8. Caret, R. L., Denniston, K. J., & Topping, J. J. (1993). Principles & applications of inorganic, organic & biological chemistry. Wm. C. Brown Publishers.
  9. Caret, R. L., Denniston, K. J., & Topping, J. J. (1995). Foundations of inorganic, organic & biological chemistry. WCB McGraw-Hill.
  10. Chang, R. (2000). Physical chemistry for the chemical and biological sciences. University Science Books.
  11. Cotton F. Albert, Geoffrey Wilkinson, & Paul L. Gaus. (1995). Basic inorganic chemistry (3rd ed.). John wiley&sons.
  12. Crichton, R. R. (2012). Biological inorganic chemistry: An new introduction to molecular structure and function (2nd ed). Elsevier.
  13. Eldik, R. van, & Hubbard, C. D. (Eds.). (2009). Advances in inorganic chemistry: V 61 – metal ion controlled reactivity. Academic Press.
  14. Engel,, & Reid, P. (2014). Physical chemistry (3rd ed). Pearson.
  15. Goldberg, D. E. (2005). Beginning chemistry (3rd ed). McGraw-Hil
  16. House, J. E. (2013). Inorganic chemistry (2nd ed.). Acadremic Press.
  17. House, J. E., & House, K. A. (2010). Descriptive inorganic chemistry (2nd ed). Academic Press.
  18. Housecroft, C. E., & G. Sharpe, A. (2012). Inorganic chemistry (4th ed). Pearson Education Limited.
  19. Laider, J. etal, John H. Meiser, & Bryan C. Sanctuary. (2003). Physical Chemistry (4th ed). Houghton Mifflin Company.
  20. Lawrance, G. A. (2010). Introduction to coordination chemistry. John Wiley and Sons Ltd.
  21. Lay, D. C. (2003). Linear algebra (2nd ed). Pearson Custom Pub.
  22. Lee, J. D. (1996). Concise inorganic chemistry (5th ed.). Blackwell Science.
  23. Linder, B. (2011). Elementary physical chemistry. World scientific.
  24. Lipschutz, S., & Lipson, M. (2005). Schaum’s outline of theory and problems of linear algebra (3rd ed). Tata McGraw-Hill.
  25. Mackay K. M. et al, & R. A. Mackay. (1968). Introduction to Modern Inorganic Chemistry (3rd ed.). International Textbook Company Limited.
  26. Metz, C. R. (2003). Physical chemistry. McRaw-Hill companies.
  27. Metz, C. R. (2009). Physical Chemistry (2nd ed.). Tata McGraw Hill.
  28. Miessler l. Gary etal. (2011). Inorganic chemistry (5th ed). Peason.
  29. Shriver D. F, & P. W.Atkins. (1999). Inorganic chemistry (3rd ed.). Oxford university.
  30. Sullivan, M. (2008). College algebra (custom ed). Prentice Hall.
  31. Tro, N. J. (2014). Chemistry: A molecular approach (Third edition). Pearson Education Company.
  32. Xu, R. et al (Eds ), Pang, W., & Huo, Q. (2011). Modern inorganic synthetic chemistry. Elsevier.
  33. Xu, R., & Xu, Y. (Eds.). (n.d.). Modern inorganic synthetic chemistry (Second edition).

 

Physics for Engineers

  1. Anderson, D. W. (1983). Absorption of ionizing radiation. University park press.
  2. Estrada, E., & Knight, P. A. (2015). A first course in network theory (First edition). Oxford University Press.
  3. Fishbane, P. M., Gasiorowicz, S., & Thornton, S. T. (1996). Physics for scientists and engineers (2nd ed). Prentice Hall.
  4. Kalet, I. (n.d.). Principles of biomedical informatics (Second edition).
  5. Knight, R. D. (n.d.-a). Physics for scientists and engineers: A strategic approach with modern physics (Fourth edition).
  6. Knight, R. D. (n.d.-b). Physics for scientists and engineers: A strategic approach with modern physics (Fourth edition).
  7. Knight, R. D. (2004). Physics for scientists and engineers: A strategic approach. Pearson/Addison Wesley.
  8. Knight, R. D. (2008a). Physics for scientists and engineers: A strategic approach (2nd ed). Pearson Addison Wesley.
  9. Knight, R. D. (2008b). Physics for scientists and engineers: A strategic approach /Student workbook volume 1 (2nd ed). Pearson Addison Wesley.
  10. Otieno, H. O. (2008). Fundamentals of university physics vol 1. CBS Publishers&Distributors.
  11. Otieno Herick. (2008). Fundamentals of university physics volume 1. Satish Kumar Jain.
  12. Sang David. (2001). Physics. Press syndicate of the university of cambrige.
  13. Serway, R. A. (2014). Physics for scientists & engineers, with modern physics (9th ed). Saunders College Pub.
  14. Serway, R. A., Beichner, R. J., & Jewett, J. W. (2000). Physics for scientists and engineers with modern physics (5th ed). Saunders College Publishing.
  15. Serway, R. A., & Vuille, C. (n.d.). College physics (11 edition).
  16. Snoke, D. W. (n.d.). Electronics: A physical approach.
  17. Thornton, S. T., & Rex, A. F. (2013). Modern physics for scientists and engineers (4th ed). Cengage Learning.
  18. Tipler, P. A., & Tipler, P. A. (1990). Physics for scientists and engineers (3rd ed). Worth Publishers.
  19. Young, H. D., Freedman, R. A., Ford, A. L., & Sears, F. W. (2004). Sears and Zemansky’s university physics (11th ed). Pearson Addison Wesley.

 

Engineering Drawing

  1. Auto Desk (Ed.). (1998). AutoCAD release 14: Users guide. Autodesk.
  2. Bhattacharya, S. K. (1998). Electrical engineering drawing (2nd ed.). New Age International (P) Ltd.
  3. Fane, B., & Byrnes, D. (2013). AutoCAD 2014 for dummies. John Wiley & Sons.
  4. Fulton, N. (1992). AutoCAD release 12 QuickStart. Que.
  5. Gerhard, M., Harper, J. M., & McFarland, J. (2009). Mastering autodesk 3ds max design 2010. Wiley Technology Pub.
  6. Gill, P. S. (2002). Engineering graphics and drafting (Millenium ed). S.K. Kataria & Sons.
  7. Gindis, E. (2011). Up and running with AutoCAD 2011. 2D and 3D drawing and modeling. Academic Press.
  8. Gladfeller, D. (2010). AutoCAD 2011 and AutoCAD LT. Sybex/John Wiley.
  9. Goetsch, D. L. (n.d.). Structural, civil and pipe drafting (Second edition).
  10. Jensen, C. H., & Helsel, J. D. (1996). Engineering drawing and design (5th ed). Glencoe.
  11. Kenya Literature Bureau (KLB). (1990). Industrial education drawing and design pupils book for form three. KLB.
  12. Morling, K. (n.d.). GEOMETRIC AND ENGINEERING DRAWING.
  13. Morling, K. (1974). Geometric and Engineering drawing (2nd ed). Elsivier Ltd.
  14. Omura, G. (2009). Mastering AutoCAD 2010 & AutoCAD lt 2010. Sybex / John Wiley.
  15. Ostrowsky O. (n.d.). Engineering drawings for technicians: Volume 2. Edward Arnold publishers.
  16. Ostrowsky, O. (1981). Engineering drawing for technichians volume 2. Edward Arnold [publishers] ltd.
  17. Richard, P., & Fitzgerald, J. (with Autodesk, Inc). (2010). Introduction to AutoCAD 2010: A modern perspective. Prentice Hall.
  18. Sidheswar, N., Kannaiah, P., & Sastry, V. V. S. (1980). Machine drawing. Tata Mcgraw Hill publishing company ltd.
  19. Simmons, C. H., Phelps, N., & Maguire, D. E. (2009). Manual of engineering drawing: Technical product specification and documentation to British and international standards (3rd ed). Elsevier/Butterworth-Heinemann.
  20. Singh, S. (2001a). Electrical engineering drawing (revised). S.K. Katarian and sons.
  21. Singh, S. (2001b). Electrical engineering drawing part 2 (revised). S.K. Kataria and sons.
  22. Spence, W. P. (1991). Drafting technology and practice (3rd ed.). Glencoe, Macmillan/Mcgraw -Hill.

 

Principles of Electrical Technology

  1. Bhattacharya, S. K. (1998). Electrical engineering drawing (2nd ed.). New Age International (P) Ltd.
  2. Bird, J. O. (n.d.-a). Electrical circuit theory and technology (4th edition).
  3. Bird, J. O. (n.d.-b). Electrical circuit theory and technology (4th edition).
  4. Dhogal, P. S. E. al, & Singhal. P. C et al. (1985). Basic electrical engineering vol1 with numerical problems. Tata McGraw -Hill Publishing co ltd.
  5. Dhogal, P. S., & Singhal. P. C. (1985). Basic electrical engineering vol 2. Tata McGraw -Hill.
  6. Griiffins, D. J. (2008). Introduction to electrodynamics (3rd ed.). Pearson Benjamin Cummings.
  7. Gupta, J. B. (1998a). A course in electrical technology (11th ed.). S.K Kataria and sons.
  8. Gupta, J. B. (1998b). A course in electrical technology (11th ed.). S.K Kataria and sons.
  9. Gupta, J. B. (1999). Fundamentals of electrical engineering and electronics. S.K. Kataria and Sons.
  10. Hambley, A. R. (1997). Electrical engineering: Principles and applications. Prentice Hall.
  11. Hughes, E., & Hiley, J. (2008). Hughes electrical and electronic technology (10th ed.). Pearson Education.
  12. Hughes, E., & John Hiley. (2008). Electrical and electronic technology (10th ed.). Pearsn Education Inc.
  13. Roberts, G. W., Taenzler, F., & Burns, M. (2012). An introduction to mixed-signal IC test and measurement (2nd ed). Oxford University Press.
  14. Saggio, G. (n.d.). Principles of analog electronics (1st edition).
  15. Singh, S. (2001a). Electrical engineering drawing (revised). S.K. Katarian and sons.
  16. Singh, S. (2001b). Electrical engineering drawing part 2 (revised). S.K. Kataria and sons.
  17. Theraja, B. L. (1999). A textbook of electrical technology. S. Chand and Company Ltd.

 

Organic Chemistry for Engineers

  1. Brown, W. H. (1995). Organic chemistry. Saunders College Publ.
  2. Brown, W. H. (Ed.). (2012). Organic chemistry (7th ed). Brooks/Cole, Cengage Learning.
  3. Dazeley, G. H. (1969). Organic Chemistry. Cambridge University Press.
  4. Murray, P. R. S. (1977). Principles of organic chemistry. Heinemann Educational Books Ltd.
  5. Norman, R. O. C. et al, & Waddington D. J. (1975). Modern organic chemistry (2nd ed.). ELBS Mills and Boon.
  6. Solomons, T. W. G. et al. (2006). Organic Chemistry (9th ed.). John Wiley and Sons.
  7. Solomons, G. T. W., Fryhle, C. B., & Johnson, R. G. (2004). Organic chemistry (8th ed). J. Wiley & Sons.
  8. Solomons, T. W. G. (1994). Fundamentals of organic chemistry (4th ed.). John Wiley and Sons.

 

Material Science

  1. Askeland, D. R. (2011). The science and engineering of materials (3rd ed). Cengage Learning.
  2. Barbero, E. J. (n.d.). Finite element analysis of composite materials using Abaqus.
  3. Berk, Z. (2013). Food process engineering and technology (Second edition). Academic Press.
  4. Callister, W. D., & Rethwisch, D. G. (2015). Materials science and engineering: SI Versiom (9th edition). Wiley.
  5. Chawla, K. K. (2012). Composite Materials: Science and Engineering (3rd.ed). Springer.
  6. Gilmore, C. M. (2015). Materials science and Engineering Properties (SI ed). Cengage Learning.
  7. Gross, D., Hauger, W., Schröder, J., Wall, W. A., & Bonet, J. (2011). Engineering mechanics. 2: Mechanics of materials. Springer.
  8. Ibarz, A., & Barbosa-Canovas, G. V. (n.d.-a). Introduction to food process engineering.
  9. Ibarz, A., & Barbosa-Canovas, G. V. (n.d.-b). Introduction to food process engineering.
  10. Smith, W. F. (1990). Principles of materials science and engineering (2nd ed). McGraw-Hill.
  11. Solymar, L., Walsh, D., & Solymar, L. (1998). Electrical properties of materials (6th ed). Oxford University Press.
  12. Williams, D. B., & Carter, C. B. (2008a). Transmission electron microscopy: A textbook for materials science (2nd ed). Springer.
  13. Williams, D. B., & Carter, C. B. and W. (2008b). Transmission electron microscopy: A textbook for materials science (2nd ed). Springer.

 

Mechanical Technology

  1. Bello R, S. (2012). Workshop technology and practice. DPS Dominion.
  2. Black, B. J. (2010). Workshop processes,practices and materials (4th ed.). Routledge.
  3. Chapman, W. A. J., & Martin, S. J. (1976). Workshop technology: Part 1, an introductory course (5th ed). CBS Publishers & Distributors Pvt. Ltd.
  4. Chapman, W. A. J., & Martin, S. J. (1995). Workshop technology: Part 2 (2rd ed.). CBS Publishers.
  5. Chapman W. A.J. (n.d.). workshop Technology: Part 2.
  6. Deplazes, A. & Eidgen�ossische Technische Hochschule Z�urich (Eds.). (2013). Constructing architecture: Materials, processes, structures: a handbook (Third, extended edition). Birkh�
  7. Khurmi R. S.et al, & Gupta, J. K. (1981a). A textbook of workshop technology. Nirjia publishers and printers (p) Ltd.
  8. Khurmi R. S.et al, & Gupta, J. K. (1981b). A textbook of workshop technology. Nirjia publishers and printers (p) Ltd.
  9. Richards, G. (2011). Warehouse management: A complete guide to improving efficiency and minimizing costs in the modern warehouse. Kogan Page.
  10. Singh, R. (2010a). Introduction to basic manufacturing processes and workshop technology (2nd ed.). New Age(P)Ltd.
  11. Singh, R. (2010b). Introduction to basic manufacturing processes and workshop technology (2nd ed.). New Age International(P) Ltd.
  12. Singh, R. (2010c). Introduction to basic manufacturing processes and workshop technology (2nd ed.). New Age(P)Ltd.
  13. Spence, W. P. (1991). Drafting technology and practice (3rd ed.). Glencoe, Macmillan/Mcgraw -Hill.

Fluid Mechanics

  1. Bansal, R. K. (n.d.). A textbook of fluid mechanics: {In S.I. units}. Laxmi Publications.
  2. Crowe, C. T. et al, & Elger, D. F. (with Roberson,John A). (2000). Engineering fluid mechanics (7th ed.). John Wiley & Sons Inc.
  3. Douglas J. F. (1986). Fluid mechanics (3rd ed.). pearson prentice hall.
  4. Douglas, J. F. (1986). Solving problems in fluid mechanics vol 2 (low priced edition). Longman.
  5. Douglas, J. F. (2005). Fluid Mechanics (5ed ed.). Pearson education limited.
  6. Douglas J. F, & R. D.Matthews. (1996). Solving Problems in Fluid Mechanics volume 1 (3RD EDITION). Pearson Education Limited.
  7. Giles, R. V., Evett, J. B., & Liu, C. (1994). Fluids mechanics and hydroulics (3rd ed). MacGraw Hill Companies.
  8. Goodwin, A. R. H., Sengers, J. V., Peters, C. J., Royal Society of Chemistry (Great Britain), International Union of Pure and Applied Chemistry, & International Association of Chemical Thermodynamics (Eds.). (2010). Applied thermodynamics of fluids. RSC Pu
  9. Khurmi, R. S. (1970). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  10. Kundu, P. K., & Cohen, I. M. (2008). Fluid mechanics (4th ed). Academic Press.
  11. Paul, akshoy R. et al, & thermodynamics, engineering. (2005). Mechanical Sciences. Prentice -Hall of india private ltd.
  12. Prasad, M. (2003). Solving problems in fluid mechanics vol.1 (2rd ed.). New Age International publishers pvt Ltd.
  13. Rajput, R. K. (n.d.-a). A textbook of fluid mechanics. Laxmi Publications.
  14. Rajput, R. K. (d.-b). A textbook of fluid mechanics and hydraulic machines. Laxmi Publications.
  15. Rajput, R. K. (2001). Solid and fluid mechanics. S.Chad and co.
  16. Rajput R. K. (2007). Solid and fluid mechanics. S.Chand and company ltd.
  17. Roberson, J. A. et al, & Crove, C. T. (1993). Engineering, Fluid mechanics (5th ed.). Johnwilley and sons inc.
  18. Roberson, J. A. et al, & Crowe, C. T. (1975). Engineering fluid mechanics. Mifflin co.

 

Engineering Mechanics

  1. Bansal, R. K. (n.d.). A textbook of fluid mechanics: {In S.I. units}. Laxmi Publications.
  2. Crowe, C. T. et al, & Elger, D. F. (with Roberson,John A). (2000). Engineering fluid mechanics (7th ed.). John Wiley & Sons Inc.
  3. Douglas J. F. (1986). Fluid mechanics (3rd ed.). pearson prentice hall.
  4. Douglas, J. F. (1986). Solving problems in fluid mechanics vol 2 (low priced edition). Longman.
  5. Douglas, J. F. (2005). Fluid Mechanics (5ed ed.). Pearson education limited.
  6. Douglas J. F, & R. D.Matthews. (1996). Solving Problems in Fluid Mechanics volume 1 (3RD EDITION). Pearson Education Limited.
  7. Goodwin, A. R. H., Sengers, J. V., Peters, C. J., Royal Society of Chemistry (Great Britain), International Union of Pure and Applied Chemistry, & International Association of Chemical Thermodynamics (Eds.). (2010). Applied thermodynamics of fluids. RSC Pu
  8. Khurmi, R. S. (1970). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  9. Kundu, P. K., & Cohen, I. M. (2008). Fluid mechanics (4th ed). Academic Press.
  10. Paul, akshoy R. et al, & thermodynamics, engineering. (2005). Mechanical Sciences. Prentice -Hall of india private ltd.
  11. Prasad, M. (2003). Solving problems in fluid mechanics vol.1 (2rd ed.). New Age International publishers pvt Ltd.
  12. Roberson, J. A. et al, & Crove, C. T. (1993). Engineering, Fluid mechanics (5th ed.). Johnwilley and sons inc.
  13. Roberson, J. A. et al, & Crowe, C. T. (1975). Engineering fluid mechanics. Mifflin co.

 

Applied Thermodynamics

  1. Çengel, Y. A., & Boles, M. A. (1994). Thermodynamics: An engineering approach (2nd ed). McGraw-Hill.
  2. Çengel, Y. A., Boles, M. A., & Kanoglu, M. (n.d.). Thermodynamics: An engineering approach (Ninth edition).
  3. Eastop T. D, & McConkey, A. (1993a). Applied thermodynamics for engineering technologists (5th ed.). Pearson education ltd.
  4. Eastop T. D, & McConkey, A. (1993b). Applied thermodynamics for engineering technologists (5th ed.). Pearson education ltd.
  5. Goodwin, A. R. H., Sengers, J. V., Peters, C. J., Royal Society of Chemistry (Great Britain), International Union of Pure and Applied Chemistry, & International Association of Chemical Thermodynamics (Eds.). (2010a). Applied thermodynamics of fluids. RSC P
  6. Goodwin, A. R. H., Sengers, J. V., Peters, C. J., Royal Society of Chemistry (Great Britain), International Union of Pure and Applied Chemistry, & International Association of Chemical Thermodynamics (Eds.). (2010b). Applied thermodynamics of fluids. RSC P
  7. Joel, R. (1996). Basic engineering thermodynamics (5th ed.). Pearson education ltd.
  8. Koretsky, M. D. (n.d.). Engineering and chemical thermodynamics (2nd edition).
  9. Koretsky, M. D. (2004). Engineering and chemical thermodynamics. Wiley.
  10. Kulshrestha, S. K. (2006). Thermal Engineering (2nd ed.). Vikas publishing house pvt.
  11. Moran, M. J., & Shapiro, H. N. (1992). Fundamentals of engineering thermodynamics (2nd ed.). John Wiley and sons, inc.
  12. Nagaraj, P. B., & Venkatesh D. (2007). Basic thermodynamics. New age international (p) ltd.
  13. Paul, akshoy R. et al, & thermodynamics, engineering. (2005). Mechanical Sciences. Prentice -Hall of india private ltd.
  14. Reisel, J. R. (n.d.). Principles of engineering thermodynamics.
  15. Venkanna, B. K. (2011). Applied thermodynamics.

 

Solid and Structural Mechanics I

  1. Barbero, E. J. (n.d.). Finite element analysis of composite materials using Abaqus.
  2. Beer, F. P., Johnston, E. R., & DeWolf, J. T. (2015). Mechanics of materials (7th ed). McGraw-Hill Higher Education.
  3. Bharikatti, S. S. (2003). Strength of materials (2nd ed.). Vikas publishing house private ltd.
  4. Budhu, M. (n.d.). Soil mechanics fundamentals (Imperial version).
  5. Ghavami, P. (2015). Mechanics of Materials: An introduction to engineering technology. Springer.
  6. Gonz�alez de Vallejo, L. I., & Ferrer, M. (2011). Geological engineering. CRC Press/Balkema.
  7. Goodno, B. J., & Gere, J. M. (Eds.). (n.d.-a). Mechanics of materials (Ninth Edition).
  8. Goodno, B. J., & Gere, J. M. (Eds.). (n.d.-b). Mechanics of materials (Ninth Edition).
  9. Gross, D., Hauger, W., Schröder, J., Wall, W. A., & Bonet, J. (2011). Engineering mechanics. 2: Mechanics of materials. Springer.
  10. Hibbeler, R. C. (2005a). Mechanics of materials (7th.ed). Prentice Hall.
  11. Hibbeler, R. C. (2005b). Mechanics of materials (7th.ed). Prentice Hall.
  12. Hibbeler, R. C. (2014). Mechanics of Materials (9th.ed). Pearson.
  13. Khurmi, R. S. (2007). Strength of materials (23rd ed). S. Chand and Company Ltd.
  14. Limbrunner, G. F., & D’Allaird, C. (n.d.). Applied statics and strength of materials (Sixth edition).
  15. Nash, W. A. (n.d.). Schaum’s outlines: Strength of materials (Sixth edition).
  16. Ugural, A. C., Fenster, S. K., & Ugural, A. C. (2011a). Advanced mechanics of materials and elasticity (5th ed). Prentice Hall.
  17. Ugural, A. C., Fenster, S. K., & Ugural, A. C. (2011b). Advanced mechanics of materials and elasticity (5th ed). Prentice Hall.
  18. Ansel C.et al, & Fenister. Saul K. (2012). Advanced mechanics of materials and applied elasticity (5th.ed). PEARSON EDUCATION INC.

 

  1. Electronics
  2. Allen, E., & Iano, J. (n.d.). Fundamentals of building construction: Materials and methods (Sixth edition).
  3. Beiser Arthur. (2004). Basic mathematics for electrical and elecrtonics (2nd ed.). Tata mcgraw-hill.
  4. Bobrow, L. S. (1996). Fundamentals of electrical engineering (2nd ed). Oxford University Press.
  5. Chapman, S. J. (2002). Electric machinery and power system fundamentals. McGraw-Hill.
  6. Dhogal, P. S. E. al, & Singhal. P. C et al. (1985). Basic electrical engineering vol1 with numerical problems. Tata McGraw -Hill Publishing co ltd.
  7. Esposito, (2009). Fluid power with applications (7th ed). Pearson Prentice Hall.
  8. Gupta, J. B. (1998). A course in electrical technology (11th ed.). S.K Kataria and sons.
  9. Gupta, J. B. (1999). Fundamentals of electrical engineering and electronics. S.K. Kataria and Sons.
  10. Hughes, E., & Hiley, J. (2008). Hughes electrical and electronic technology (10th ed.). Pearson Education.
  11. Hughes, E., & John Hiley. (2008). Electrical and electronic technology (10th ed.). Pearsn Education Inc.
  12. Theraja, B. L. (1999). A textbook of electrical technology. S. Chand and Company Ltd.

 

Mechanical Technology

  1. Bello R, S. (2012). Workshop technology and practice. DPS Dominion.
  2. Black, B. J. (2010). Workshop processes,practices and materials (4th ed.). Routledge.
  3. Chapman, W. A. J., & Martin, S. J. (1995). Workshop technology: Part 2 (2rd ed.). CBS Publishers.
  4. Chapman W. A.J. (n.d.). workshop Technology: Part 2.
  5. Goetsch, D. L., & Rickman, R. L. (2016). Technical drawing and engineering communication (7th ed). Cengage learning.
  6. Khurmi R. S.et al, & Gupta, J. K. (1981a). A textbook of workshop technology. Nirjia publishers and printers (p) Ltd.
  7. Khurmi R. S.et al, & Gupta, J. K. (1981b). A textbook of workshop technology. Nirjia publishers and printers (p) Ltd.
  8. Singh, R. (2010). Introduction to basic manufacturing processes and workshop technology (2nd ed.). New Age(P)Ltd.
  9. Spence, W. P. (1991). Drafting technology and practice (3rd ed.). Glencoe, Macmillan/Mcgraw -Hill.

Differential Equations

  1. Beiser Arthur. (2004). Basic mathematics for electrical and elecrtonics (2nd ed.). Tata mcgraw-hill.
  2. Bird, J. O. (1999). Higher engineering mathematics (3rd ed). Newnes.
  3. Dass H. K. (1988). Advanced Engineering Mathematics: For the students of M.E,B.E. and other engineering examination. S.Chand & Company Ltd.
  4. Dass H. K. (2007). Engineering mathematics (13th ed.). S. Chand and compy Ltd.
  5. Edwards, C. H., & Penney, D. E. (1994). Calculus with analytic geometry: Early transcendentals version (4th ed). Prentice Hall.
  6. Edwards, C. H., & Penney, D. E. (2004). Differential equations and boundary value problems: Computing and modeling (3rd ed). Pearson Education.
  7. Edwards, C. H., Penney, D. E., & Edwards, C. H. (2002). Calculus: Early transcendentals: matrix version (6th ed). Prentice Hall.
  8. Ghosh R. K, & K. C.Maity. (1971). An introduction to differential equations. New central book agency.
  9. Hunt, R. A. (1988). Calculus with analytic geometry. Harper & Row.
  10. Jordan D. W, & P Smith. (1977). Nonlinear ordinary differential equations: An introduction for scientists and engineers (4th ed.). Oxford university press.
  11. Moin, P. (2010a). Fundamentals of engineering numerical analysis (2nd ed). Cambridge University Press.
  12. Moin, P. (2010b). Fundamentals of engineering numerical analysis (2nd ed). Cambridge University Press.
  13. Nagle, R. K., Saff, E. B., & Snider, A. D. (2012). Fundamentals of differential equations and boundary value problems (6th ed). Pearson Addison-Wesley.
  14. Robinson, J. C. (2004). An introduction to ordinary differential equations. Cambridge University Press.
  15. Saggio, G. (n.d.). Principles of analog electronics (1st edition).
  16. Stroud, K. A. et al, & Booth, D. J. (2003). Advanced engineering mathematics (4th ed). Palgrave McMillan.
  17. Tveito, A., & Winther, R. (2009). Introduction to partial differential equations: A computational approach. Springer.
  18. Uppal, S. M. et al (Ed.). (1996). Applied mathematics for craft engineering. Jomo Kenyatta Foundation.

 

Mechanics of Machines I

  1. Balakannan, K. (2011). Mechanics of machines-I / Theory and illustrations. LAP LAMBERT Academic p
  2. Hannah, J., & Stephen, R. C. (1984). Mechanics of machines (4th ed.). Edward Arnold.
  3. Khurmi, R. S. et al, & Gupta, J. K. (1976). Theory of machines. Eurasia publishing house.
  4. Khurmi, R. S. (1970). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  5. Rajput, R. K. (n.d.). A textbook of fluid mechanics and hydraulic machines. Laxmi Publications.
  6. Uicker, J. J. et al, & Pennock, G. (n.d.). Theory of machines and mechanisms.

 

Computer Aided Drawing

  1. Auto Desk (Ed.). (1998). AutoCAD release 14: Users guide. Autodesk.
  2. Fane, B., & Byrnes, D. (2013). AutoCAD 2014 for dummies. John Wiley & Sons.
  3. French Thomans E et al, & Svensen, C. et al. (1990). Mechanical Drawing (11th ed.). Glencoe Macmillan/ McGraw.
  4. Gindis, E. (2011a). Up and running with AutoCAD 2011. 2D and 3D drawing and modeling. Academic Press.
  5. Gindis, E. (2011b). Up and running with AutoCAD 2011. 2D and 3D drawing and modeling. Academic Press.
  6. Gladfeller, (2010). AutoCAD 2011 and AutoCAD LT. Sybex/John Wiley.
  7. Kalameja, A. J. (2006). The AutoCAD 2006 tutor for engineering graphics. Autodesk/Thomson Delmar Learning.
  8. Kirkpatrick, B. L., & Kirkpatrick, J. M. (with Pei Cobb Freed & Partners). (2007). AutoCAD 2007 for interior design and space planning. Pearson Prentice Hall.
  9. Lamit, L. G. (1998). Basic Pro/ENGINEER in 20 lessons. PWS Pub. Co.
  10. McLain-Kark, J. (1998). The designer’s AutoCAD release 14 tutorial. Dame publications.
  11. Omura, G. (2009). Mastering AutoCAD 2010 & AutoCAD lt 2010. Sybex / John Wiley.
  12. Pandey, S. K. (n.d.). Learn Autocad in a easy way.
  13. Puerta, F. E. (with Autodesk, Inc). (2009). AutoCAD 2009 in 3D: A modern perspective. Pearson/Prentice Hall.
  14. Shumaker, T. M., Madsen, D. A., & Madsen, D. P. (n.d.). AutoCAD and its applications. Basics 2015 (22nd edition).

 

Workshop Technology

  1. Bello R, S. (2012). Workshop technology and practice. DPS Dominion.
  2. Black, B. J. (n.d.). Workshop processes, practices and materials (5th edition).
  3. Chapman W. A.J. (n.d.). workshop Technology: Part 2.
  4. Deplazes, A. & Eidgen�ossische Technische Hochschule Z�urich (Eds.). (2013). Constructing architecture: Materials, processes, structures: a handbook (Third, extended edition). Birkh�
  5. Goetsch, D. L., & Rickman, R. L. (2016). Technical drawing and engineering communication (7th ed). Cengage learning.
  6. Khurmi R. S.et al, & Gupta, J. K. (1981). A textbook of workshop technology. Nirjia publishers and printers (p) Ltd.
  7. Singh, R. (2010). Introduction to basic manufacturing processes and workshop technology (2nd ed.). New Age(P)Ltd.

 

Probability and Statistics

  1. Devore, J. L. (2004). Probability and statistics for engineering and the sciences (6th ed). Thomson-Brooks/Cole.
  2. Devore Jay L. (2008). Probability and statistics for engineering and the sciences (7ed ed.). Thomson brooks/cole.
  3. Feller, W. (2000). An introduction to probability theory and its applications (3d ed). Wiley.
  4. Freund, J. E., & Perles, B. M. (2004a). Statistics: A first course (8th ed). Pearson Prentice Hall.
  5. Freund, J. E., & Perles, B. M. (2004b). Statistics: A first course (8th ed). Pearson Prentice Hall.
  6. Hogg, R. V. et al, & Tanis, E. A. (1997). Probability and statistical inference (5th ed.). Prentice Hall.
  7. Lipschutz, S., & Schiller, J. J. (2005). Schaum’s outline of theory and problems of introduction to probability and statistics. Tata McGraw Hill.
  8. McClave, J. T., & Sincich, T. (1995a). A first course in statistics (5th ed). Prentice Hall.
  9. McClave, J. T., & Sincich, T. (1995b). A first course in statistics (5th ed). Prentice Hall.
  10. Probability and statistics. (n.d.).
  11. Ross, S. M. (1996). Introductory statistics. The McGraw-Hill Co,Inc.
  12. Scheaffer, R. L., & Mc Clave James T. (1995). Probability and statistics for engineers (4th ed). Duxbury press.

 

Microprocessors

  1. Brey, B. B. (1997). The Intel microprocessors: 8086/8088, 80186/80188, 80286, 80386, 80486, Pentium, and Pentium Pro processor (4th ed). Prentice Hall.
  2. Marriwala Nikhil. (2009). Microprocessors and interfacing. S.K.Kataria&sons.
  3. Singh Anokh et al, & A. K.Chand. (1992). Fundamentals of Digital Electronics And Microprocessors (Revised Edition). S.Chand & Company Ltd.

 

  1. Electrical and Electronic Technology
  2. Dhogal, P. S. E. al, & Singhal. P. C et al. (1985). Basic electrical engineering vol1 with numerical problems. Tata McGraw -Hill Publishing co ltd.
  3. Dhogal, P. S., & Singhal. P. C. (1985). Basic electrical engineering vol 2. Tata McGraw -Hill.
  4. Esposito, A. (2009). Fluid power with applications (7th ed). Pearson Prentice Hall.
  5. Gupta, J. B. (1998a). A course in electrical technology (11th ed.). S.K Kataria and sons.
  6. Hughes, E., & Hiley, J. (2008). Hughes electrical and electronic technology (10th ed.). Pearson Education.
  7. Hughes, E., & John Hiley. (2008a). Electrical and electronic technology (10th ed.). Pearsn Education Inc.
  8. Singh, S. (2001). Electrical engineering drawing (revised). S.K. Katarian and sons.
  9. Theraja, B. L. (1999). A textbook of electrical technology. S. Chand and Company Ltd.
  10. Theraja B. L, & A. K.Theraj (2005). A textbook of electrical technology: Volume iii transmission,distribution&utilization. S Chand &company.

 

Nondestructive Testing of Materials

  1. Barbero, E. J. (n.d.). Finite element analysis of composite materials using Abaqus.
  2. Beer, F. P., Johnston, E. R., & DeWolf, J. T. (2015). Mechanics of materials (7th ed). McGraw-Hill Higher Education.
  3. Ghavami, P. (2015). Mechanics of Materials: An introduction to engineering technology. Springer.
  4. Goodno, B. J., & Gere, J. M. (Eds.). (n.d.). Mechanics of materials (Ninth Edition).
  5. Gross, D., Hauger, W., Schröder, J., Wall, W. A., & Bonet, J. (2011). Engineering mechanics. 2: Mechanics of materials. Springer.
  6. Hibbeler, R. C. (2014). Mechanics of Materials (9th.ed). Pearson.

 

Mechanics of Machines II

  1. Balakannan, K. (2011). Mechanics of machines-I / Theory and illustrations. LAP LAMBERT Academic publishing.
  2. Hannah, J., & Stephen, R. C. (1984). Mechanics of machines (4th ed.). Edward Arnold.
  3. Khurmi, R. S. et al, & Gupta, J. K. (1976). Theory of machines. Eurasia publishing house.
  4. Khurmi, R. S. (1970a). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  5. Khurmi, R. S. (1970b). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  6. Rajput, R. K. (n.d.). A textbook of fluid mechanics and hydraulic machines. Laxmi Publications.
  7. Uicker, J. J. et al, & Pennock, G. (n.d.). Theory of machines and mechanisms.

       

Metrology

  1. Spence, W. P. (1991). Drafting technology and practice (3rd ed.). Glencoe, Macmillan/Mcgraw -Hill.

Heat Transfer and Heat Exchanger

  1. Çengel, Y. A., & Boles, M. A. (1994). Thermodynamics: An engineering approach (2nd ed). McGraw-Hill.
  2. Eastop T. D, & McConkey, A. (1993). Applied thermodynamics for engineering technologists (5th ed.). Pearson education ltd.
  3. Joel, R. (1996). Basic engineering thermodynamics (5th ed.). Pearson education ltd.
  4. Koretsky, M. D. (n.d.). Engineering and chemical thermodynamics (2nd edition).
  5. Koretsky, M. D. (2004). Engineering and chemical thermodynamics. Wiley.
  6. Kulshrestha, S. K. (2006). Thermal Engineering (2nd ed.). Vikas publishing house
  7. Moran, M. J., & Shapiro, H. N. (1992). Fundamentals of engineering thermodynamics (2nd ed.). John Wiley and sons, inc.
  8. Nagaraj, P. B., & Venkatesh D. (2007). Basic thermodynamics. New age international (p) ltd.
  9. Paul, akshoy R. et al, & thermodynamics, engineering. (2005). Mechanical Sciences. Prentice -Hall of india private ltd.
  10. Reisel, J. R. (n.d.). Principles of engineering thermodynamics.
  11. Varzakas, T., & Tzia, C. (Eds.). (n.d.). Food engineering handbook. Food engineering fundamentals.

 

Numerical Methods 

  1. Brockwell, P. J., & Davis, R. A. (2016). Introduction to time series and forecasting (3rd ed). S
  2. Jain, M. K. et al, Iyengar, S. R. K., & Jain, R. K. (1985). Numerical methods for scientific and engineering computation. Wiley.
  3. Lions, J. L., & Lions, J.-L. (2004). Mathematical analysis and numerical methods for science and technology. World Scientific Publishing Co.Pte.Ltd.
  4. Moin, P. (2010). Fundamentals of engineering numerical analysis (2nd ed). Cambridge University Press.
  5. Ortega, J. M., & Grimshaw, A. S. (1999). An introduction to C++ and numerical methods. Oxford University Press.
  6. Shumway, R. H., & Stoffer, D. S. (2017). Time series analysis and its applications: With R Examples (Fourth edition). Springer.
  7. Zienkiewicz, O. C., Taylor, R. L., & Zhu, J. Z. (n.d.). The finite element method: Its basis and fundamentals (Seventh edition).

Power Electronics and Mechatronic Systems

  1. Bolton, W. (n.d.). Mechatronics: Electrical control systems in mechanical and electrical engineering (Sixth edition).
  2. Bose, B. K. (2006). Power electronics and motor drives: Advances and trends. Elsevier/Academic Press.
  3. Dhogal, P. S. E. al, & Singhal. P. C et al. (1985). Basic electrical engineering vol1 with numerical problems. Tata McGraw -Hill Publishing co ltd.
  4. Fischer-Cripps, A. C. (n.d.). The electronics companion: Devices and circuits for physicists and engineers (2nd edition).
  5. Gupta, J. B. (1998). A course in electrical technology (11th ed.). S.K Kataria and sons.
  6. Hillier, V. A. W., Coombes, P., & Rogers, D. R. (2006). Hillier’s fundamentals of motor vehicle technology book 2: Powertrain electronics (5th ed). Nelson Thornes.
  7. Hughes, E., & Hiley, J. (2008). Hughes electrical and electronic technology (10th ed.). Pearson Education.
  8. Hughes, E., & John Hiley. (2008a). Electrical and electronic technology (10th ed.). Pearsn Education Inc.
  9. Hughes, E., & John Hiley. (2008b). Electrical and electronic technology (10th ed.). Pearsn Education Inc.
  10. Luo, F. L., & Ye, H. (2010). Power electronics: Advanced conversion technologies. CRC Press/Taylor & Francis.
  11. Roberts, G., Taenzler, F., & Burns, M. (2012). An introduction to mixed-signal IC test and measurement (2nd ed). Oxford University Press.
  12. Sen, P. C. (2010). Modern Power Electronics. S.Chand & Company Ltd.
  13. Theraja, B. L., & Theraja, A. K. (1999). A textbook of electrical technology. S. Chand and Company Ltd.

Internal Combustion Engines

  1. Hillier, V. A. W., & Amimi, F. P. (1981). Fundamentals of motor vehicle technology (3rd ed.). Hutchison and Company ltd.
  2. Hillier, V. A. W., Coombes, P., & Rogers, D. R. (2006). Hillier’s fundamentals of motor vehicle technology book 2: Powertrain electronics (5th ed). Nelson Thornes.
  3. Hillier, V. A. W., & R. Rodgers, D. (2007). Hillier’s fundamentals of motor vehicle technology: Chassis and body electronics (5th ed). Nelson Thornes Ltd.
  4. Omuya, R. et al, Okech, W., & Achieng, M. (with KLB). (2018). Motor vehicle technology for artisan: Level 1 (2nd ed.). KLB.
  5. Rajput R. K. (2007). A textbook of internal combustion engines (2nd ed.). Laxmi publications(p)ltd.
  6. Rajput, R. K. (2007). Internal combustion engines (2nd ed). Laxmi Publications.
  7. Read P. P.J. et al. (2000). Motor Vehicle Technology For Mechanics: The Motivate Series. Macmillan Publishers Ltd.
  8. Singal, R. K. (2010). Internal combustion engines (3rd ed.). S. K. Kataria & Sons.

 

System Control and Instrumentation Engineering

  1. Bolton, W. (n.d.). Mechatronics: Electrical control systems in mechanical and electrical engineering (Sixth edition).
  2. Groover, M. P. (2016). Automation, production systems, and computer-integrated manufacturing (Fourth edition). Pearson Education Limited.
  3. Mohan, (2012). Electric machines and drives: A first course. Wiley.
  4. Nagrath, I. J., & Gopal, M. (2007). Control systems engineering (5th ed). New Age International Publishers.
  5. Qiu, P. (n.d.). Introduction to statistical process control.
  6. Roberts, G. W., Taenzler, F., & Burns, M. (2012). An introduction to mixed-signal IC test and measurement (2nd ed). Oxford University Press.
  7. Xavier, S. P. E., & Babu, J. C. (1999). Principles of control systems. S. Chand & company Ltd.

Engineering Design

  1. Dieter, G. E. (1983). Engineering design: A materials and processing approach. McGraw-Hill.
  2. Fadali, M. S., & Antonio Visioli. (2009). Digital Control Engineering :Analysis and Design. EWLSEVIER.
  3. Goetsch, D. L., & Rickman, R. L. (2016). Technical drawing and engineering communication (7th ed). Cengage learning.
  4. Hyman, B. (2002). Fundamentals of engineering design (2nd ed). Prentice Hall/Pearson Education.
  5. Jensen, C. H., & Helsel, J. D. (1996). Engineering drawing and design (5th ed). Glencoe.
  6. Mandal, A. K. (2012). Introduction to Control Engineering: Modelling,Analysis and Design (2nd ed). New Age International Publisher.
  7. Montgomery, D. C. (2013). Design and analysis of experiments (Eighth edition). John Wiley & Sons, Inc.
  8. Schlabbach, J. et al, & Rofalski, K.-H. (2014). Power system engineering: Planning, design, and operation of power systems and equipment. Wiley-VCH.
  9. Warren Dene R. (1996). Civil engineering constrution design and management: Design and management. Palgrave.

Computer Aided Design and Manufacturing

  1. French Thomans E et al, & Svensen, C. et al. (1990). Mechanical Drawing (11th ed.). Glencoe Macmillan/ McGraw.
  2. Gerhard, M., Harper, J. M., & McFarland, J. (2009). Mastering autodesk 3ds max design 2010. Wiley Technology Pub.
  3. Hayt, W. H., Kemmerly, J. E., & Durbin, S. M. (2012). Engineering circuit analysis (8th ed). McGraw-H
  4. Omura, G. (2009). Mastering AutoCAD 2010 & AutoCAD lt 2010. Sybex / John Wiley.
  5. Sarkar, J. (n.d.). Computer aided design: A conceptual approach.
  6. Shumaker, T. M., Madsen, D. A., & Madsen, D. P. (n.d.). AutoCAD and its applications. Basics 2015 (22nd edition).
  7. Wu, S., Lee, A., & Onyenobi, T. (Eds.). (2012). Computer aided design guide for architecture, engineering, and construction. SPON Press.

Mechanical Vibrations

  1. Balakannan, K. (2011). Mechanics of machines-I / Theory and illustrations. LAP LAMBERT Academic publish
  2. Hannah J. (1984). Mechanics of Machines (4th ed). Edward Arnold.
  3. Khurmi, R. S. et al, & Gupta, J. K. (1976). Theory of machines. Eurasia publishing house.
  4. Khurmi, R. S. (1970). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  5. Rajput, R. K. (n.d.). A textbook of fluid mechanics and hydraulic machines. Laxmi Publications.
  6. Uicker, J. J. et al, & Pennock, G. (n.d.). Theory of machines and mechanisms.

 

Research Methodology

  1. Babbie, E., & Benaquisto, L. (2002). Fundamentals of social research. Thomson Nelson.
  2. Cauvery, R. [et al (Ed.). (2003). Research Methodology. S. Chand and Company Ltd.
  3. Cauvery R. et al. (2003). Research Methodology. S.Chad &Company.
  4. Creswell, J. W., & Clark, V. L. P. (2018). Designing and conducting mixed methods research (3rd ed.). Sage publ.
  5. Flick, U. (n.d.). Introducing research methodology: Thinking your way through your research project (3rd ed).
  6. Henry, G. T. (2010). Introduction to research methodology. The olive Marketing and publishing company.
  7. Kothari, C. R. (2019). Research methodology: Methods and techniques (4th ed). New Age International Limited.
  8. Kumar, R. (2005). Research methodology (2nd ed.). SAGE publications.
  9. Pruzan, P. (2016). Research methodology. Springer.
  10. Selvam, S. G. (2017). Empirical Research: A study Guide. Paulines Publication Africa.
  11. Walliman, N. (2010). Research methods: The basics. Routledge.

Solid  and Structural Mechanic

  1. Barbero, E. J. (n.d.). Finite element analysis of composite materials using Abaqus.
  2. Bauchau, O. A., & Craig, J. I. (2009). Structural analysis: With applications to aerospace structures. Springer.
  3. Benvenuto, E. (1991). An introduction to the history of structural mechanics. Springer-Verlag.
  4. Bharikatti, S. S. (2003). Strength of materials (2nd ed.). Vikas publishing house private ltd.
  5. Ghavami, P. (2015). Mechanics of Materials: An introduction to engineering technology. Springer.
  6. Goodno, B. J., & Gere, J. M. (Eds.). (n.d.). Mechanics of materials (Ninth Edition).
  7. Gross, D., Hauger, W., Schröder, J., Wall, W. A., & Bonet, J. (2011). Engineering mechani 2: Mechanics of materials. Springer.
  8. Hibbeler, R. C. (2005). Mechanics of materials (7th.ed). Prentice Hal
  9. Khurmi, R. S. (2007). Strength of materials (23rd ed). S. Chand and Company Ltd.
  10. Nash, W. A. (n.d.). Schaum’s outlines: Strength of materials (Sixth edition).
  11. Ugural, A. C., Fenster, S. K., & Ugural, A. C. (2011). Advanced mechanics of materials and elasticity (5th ed). Prentice Hall.

Building Services Engineering

  1. Allen, E., & Iano, J. (n.d.). Fundamentals of building construction: Materials and methods (Sixth edition).
  2. Hall, F. (2011). Building services handbook. Elsevier Butterworth-Heinemann.

Industrial Hydraulics and Pneumatics

  1. Bansal, R. K. (n.d.). A textbook of fluid mechanics: {In S.I. units}. Laxmi Publications.
  2. Esposito, A. (2009). Fluid power with applications (7th ed). Pearson Prentice Ha
  3. Khurmi, R. S. (1970). Atextbook of hydraulics, fluid mechanics and hydraulic machines: For the students of degree and diploma courses. S.Chand & Company Ltd.
  4. Sharma, R. K., & Sharma, T. K. (2003). A textbook of water engineering: Including dams engineering, hydrology and fluid power engineering. S.Chand & Company Ltd.

Quality Control and Plant Maintenance

  1. Fang, H., & Duan, M. (2014). Offshore operation facilities: Equipment and procedures. Gulf professional publ.
  2. Salvendy, G. (Ed.). (2012). Handbook of human factors and ergonomics (4th ed). Wiley.

Engine Technology

  1. Arnold, E. (1987). Engineering and technology. Edward Arnold.
  2. Bird, J. O. (n.d.). Electrical circuit theory and technology (4th edition).
  3. Gupta, J. B. (1998). A course in electrical technology (11th ed.). S.K Kataria and sons.
  4. Khurmi R. S, & Gupta, J. K. (1981). A textbook of workshop technology. Nirjia publishers and printers (p) Ltd.
  5. Singh, R. (2010). Introduction to basic manufacturing processes and workshop technology (2nd ed.). New Age(P)Ltd.
  6. Singh, S. (2001). Electrical engineering drawing part 2 (revised). S.K. Kataria and sons.
  7. Technology for the automotive trade volume 2: Automotive engineering. (1989). Deutsche Gesellschaft fur Technische Zusanmmenarbeit (GTZ).
  8. Theraja, B. L. (1999). A textbook of electrical technology. S. Chand and Company Ltd.
  9. Theraja, B. L., & Theraja, A. K. (1999). A textbook of electrical technology. S. Chand and Company Ltd.

 

 

 

E-BOOKS

 

Calculus 

  1. Deborah Hughes-Hallett, Andrew M. Gleason, & William G. McCallum. (2021a). Calculus. Wiley.
  2. Deborah Hughes-Hallett, Andrew M. Gleason, & William G. McCallum. (2021b). Calculus. Wiley.
  3. Deborah Hughes-Hallett, Patti Frazer Lock, Andrew M. Gleason, Daniel E. Flath, Sheldon P. Gordon, David O. Lomen, David Lovelock, William G. McCallum, Brad G. Osgood, Andrew Pasquale, Jeff Tecosky-Feldman, Joseph Thrash, Karen R. Rhea, & Thomas W. Tucker.
  4. Howard Anton, Irl C. Bivens, & Stephen Davis. (2022a). Calculus. Wiley.
  5. Howard Anton, Irl C. Bivens, & Stephen Davis. (2022b). Calculus. Wiley.
  6. Howard Anton, Irl C. Bivens, & Stephen Davis. (2022c). Calculus: Early Transcendentals, Student Solutions Manual. Wiley.
  7. Saturnino L. Salas, Garret J. Etgen, & Einar Hille. (2022). Calculus. Wiley.

 

 

HIV/ AIDS

  1. Elizabeth Fee, Daniel M. Fox, Elizabeth Fee, & Daniel M. Fox. (2023). AIDS. University of California Press.
  2. James Chambers. (2022). HIV and AIDS Sourcebook, Eighth Edition. Omnigraphics.
  3. Simon Uchenna Ortuanya. (2023). HIV and AIDS. Malthouse Press.

CIT 3117 Introduction to Computers and Applications

  1. Stallings, W. (2021). Computer Organization and Architecture, Global Edition. In Computer Organization and Architecture, Global Edition (Vol. 11). Pearson UK.
  2. Bindal, A. (2019). Fundamentals of Computer Architecture and Design. In Fundamentals of Computer Architecture and Design (Vol. 2). Springer.
  3. Kumar Singh, N., D. Crutcher, P., & Tiegs, P. (2021). Essential Computer Science. In Essential Computer Science (Vol. 1). Apress.
  4. Schneider, G. M., & Gersting, J. (2018). Invitation to Computer Science. In Invitation to Computer Science (Vol. 8). Cengage.
  5. Forouzan, B. (2023). Foundations of Computer Science. In Foundations of Computer Science (Vol. 5). Cengage.
  6. Ram, B. (2007). Computer Fundamentals: Architecture & Organisation. New Age International Ltd.

SME 3101 Algebra

E-books

  1. Gajjar, P. (2020). Foundation Algebra. In Foundation Algebra (Vol. 1). Bloomsbury Publishing UK.
  2. Abrahamson, J. (2021). Algebra and Trigonometry. In Algebra and Trigonometry (Vol. 1). Openstax.
  3. Abrahamson, J. (2021). Algebra and Trigonometry. In Algebra and Trigonometry (Vol. 2). Openstax.
  4. Lial, M., Hornsby, J., & McGinnis, T. (2020). Introductory Algebra, Global Edition. In Introductory Algebra, Global Edition (Vol. 11). Pearson UK.
  5. Jr Tobey, J., Slater, J., Blair, J., & Crawford, J. (2021). Beginning & Intermediate Algebra: Pearson New International Edition . In Beginning & Intermediate Algebra: Pearson New International Edition (Vol. 4). Pearson UK.
  6. Martin-Gay, E. (2021). Beginning & Intermediate Algebra: Pearson New International Edition . In Beginning & Intermediate Algebra: Pearson New International Edition (Vol. 5). Pearson UK.
  7. Marecek, L., & Honeycutt Mathis, A. (2021). Intermediate Algebra. In Intermediate Algebra (Vol. 2). Openstax.
  8. Martin-Gay, E. (2021). Intermediate Algebra: Pearson New International Edition . In Intermediate Algebra: Pearson New International Edition (Vol. 6). Pearson UK.

 

SME 3103 Calculus I

E-books

  1. Rahmani-Andebili, M. (2021). Calculus. In Calculus. Springer.
  2. Gajjar, P. (2020). Foundation Calculus. In Foundation Calculus (Vol. 1). Bloomsbury Publishing UK.
  3. Hughes-Hallett, D., M. Gleason, A., E. Flath, D., Frazer Lock, P., P. Gordon, S., O. Lomen, D., Lovelock, D., G. McCallum, W., G. Osgood, B., Pasquale, A., Tecosky-Feldman, J., Thrash, J., R. Rhea, K., & W. Tucker, T. (2022). Applied Calculus. In Applied C
  4. Strang, G., & “Jed” Herman, E. (2020). Calculus: Volume 1. In Calculus: Volume 1 (Vol. 1). Openstax.
  5. Strang, G., & “Jed” Herman, E. (2021). Calculus: Volume 2. In Calculus: Volume 2 (Vol. 1). Openstax.
  6. Strang, G., & “Jed” Herman, E. (2021). Calculus: Volume 3. In Calculus: Volume 3 (Vol. 1). Openstax.
  7. Schneider, D., C. Lay, D., J. Goldstein, L., & H. Asmar, N. (2018). Calculus & Its Applications, Global Edition. In Calculus & Its Applications, Global Edition (Vol. 14). Pearson UK.
  8. Gerard Walschap. (2015). Multivariable Calculus and Differential Geometry. De Gruyter.
  9. https://search.ebscohost.com/login.aspx?direct=true&db=nlebk&AN=1017025&site=eds-live
  10. Greenwell, R., P. Ritchey, N., & L. Lial, M. (2016). Calculus with Applications, Global Edition. In Calculus with Applications, Global Edition (Vol. 11). Pearson UK.

SCS 2106 Physical and Inorganic Chemistry for Engineers

E-books

  1. Flowers, P., Theopold, K., Langley, R., & R. Robinson, W. (2021). Chemistry. In Chemistry (Vol. 2). Openstax.
  2. Akitsu, T. (2023). Schiff Base in Organic, Inorganic and Physical Chemistry. In Schiff Base in Organic, Inorganic and Physical Chemistry. IntechOpen.
  3. Kenneth S Schmitz. (2017). Physical Chemistry: Concepts and Theory. Elsevier.
  4. B. K. Ambasta. (2016). Chemistry for Engineers (KU, Haryana): Vol. Fifth edition. Laxmi Publications Pvt Ltd.
  5. Marie O. Mendoza, R. (2023). Overview of Inorganic Compounds. Arcler Press.
  6. Matson, M., & Orbaek, A. W. (2013). Inorganic Chemistry for Dummies. John Wiley & Sons, Incorporated.
  7. Pfennig, B. W. (2015). Principles of Inorganic Chemistry. John Wiley & Sons, Incorporated.

SPS 3101 Physics for Engineers I

 

 

E-books

  1. Young, H., & A. Freedman, R. (2021). University Physics with Modern Physics, Global Edition. In University Physics with Modern Physics, Global Edition (Vol. 14). Pearson UK.
  2. Ling, S., Sanny, J., & Moebs, W. (2021). University Physics: Volume 1. In University Physics: Volume 1 (Vol. 1). Openstax.
  3. Ling, S., Sanny, J., & Moebs, W. (2021). University Physics: Volume 2. In University Physics: Volume 2 (Vol. 1). Openstax.
  4. Ling, S., Sanny, J., & Moebs, W. (2021). University Physics: Volume 3. In University Physics: Volume 3 (Vol. 1). Openstax.
  5. Wolfson, R. (2021). Essential University Physics, Volume 1, Global Edition. In Essential University Physics, Volume 1, Global Edition (Vol. 3). Pearson UK.
  6. Wolfson, R. (2021). Essential University Physics, Volume 2, Global Edition. In Essential University Physics, Volume 2, Global Edition (Vol. 3). Pearson UK.
  7. Giancoli, D. (2023). Physics for Scientists & Engineers: with Modern Physics, Global Edition. In Physics for Scientists & Engineers: with Modern Physics, Global Edition (Vol. 5). Pearson UK.
  8. D Knight, R. (2022). Physics for Scientists and Engineers: A Strategic Approach with Modern Physics, Global Edition. In Physics for Scientists and Engineers: A Strategic Approach with Modern Physics, Global Edition (Vol. 5). Pearson UK.

ones, B., Field, S., & D Knight, R. (2023). College Physics: A Strategic Approach, Global Edition. In College Physics: A Strategic Approach, Global Edition (Vol. 4). Pearson UK.

 

EME 3100 Introduction to Mechanical Engineering

EME 3101 Engineering Drawing I

E-books

  1. Giesecke, F., Lockhart, S., M. Johnson, C., & Goodman, M. (2023). Technical Drawing with Engineering Graphics. In Technical Drawing with Engineering Graphics (Vol. 16). Pearson US.
  2. Liebenberg, G., & du Toit, L. (2021). N2 Engineering Drawing. In N2 Engineering Drawing (Vol. 1). FutureManagers.
  3. Rathnam, K. (2017). A First Course in Engineering Drawing. In A First Course in Engineering Drawing. Springer.
  4. Madsen, D. (2016). Engineering Drawing and Design. In Engineering Drawing and Design (Vol. 6). Cengage.
  5. Bert Bielefeld & Isabella Skiba. (2013). Basics Technical Drawing. Birkhäuser.

SME 3102 Geometry

E-books

  1. Serres, M. (2017). Geometry. In Geometry (Vol. 1). Bloomsbury Publishing UK.
  2. Pemberton, S. (2018). Cambridge International AS & A Level Mathematics: Pure Mathematics 1 Coursebook Digital Edition. In Cambridge International AS & A Level Mathematics: Pure Mathematics 1 Coursebook Digital Edition. Cambridge University Press.
  3. Barry, P. D. (2015). Geometry with Trigonometry. Elsevier Science & Technology.
  4. Budur, N., Fernex, T. de, & Docampo, R. (2018). Local and Global Methods in Algebraic Geometry. American Mathematical Society.

SME 3104 Calculus II

E-books

 

  1. Croft, A., & Davison, R. (2020). Mathematics for Engineers. In Mathematics for Engineers (Vol. 5). Pearson UK.
  2. Croft, A., & Davison, R. (2019). Mathematics for Engineers. In Mathematics for Engineers (Vol. 5). Pearson UK.
  3. Croft, A., & Davison, R. (2022). Mathematics for Engineers . In Mathematics for Engineers (Vol. 4). Pearson UK.
  4. Gajjar, P. (2020). Foundation Calculus. In Foundation Calculus (Vol. 1). Bloomsbury Publishing UK.
  5. Rahmani-Andebili, M. (2023). Calculus II. In Calculus II. Springer.
  6. Rahmani-Andebili, M. (2023). Calculus III. In Calculus III. Springer.
  7. Strang, G., & “Jed” Herman, E. (2020). Calculus: Volume 1. In Calculus: Volume 1 (Vol. 1). Openstax.
  8. Strang, G., & “Jed” Herman, E. (2021). Calculus: Volume 2. In Calculus: Volume 2 (Vol. 1).
  9. Strang, G., & “Jed” Herman, E. (2021). Calculus: Volume 3. In Calculus: Volume 3 (Vol. 1). Openstax.
  10. Zou, Y. (2018). Single Variable Calculus. In Single Variable Calculus (Vol. 1). De Gruyter.
  11. Thomas, G., D. Weir, M., & R. Hass, J. (2021). Thomas’ Calculus Early Transcendentals: Pearson New International Edition. In Thomas’ Calculus Early Transcendentals: Pearson New International Edition (Vol. 12). Pearson UK.
  12. Briggs, W., Cochran, L., & Gillett, B. (2016). Calculus: Early Transcendentals, Global Edition. In Calculus: Early Transcendentals, Global Edition (Vol. 2). Pearson UK.
  13. Hughes-Hallett, D., M. Gleason, A., Flath, D., Frazer Lock, P., P. Gordon, S., O. Lomen, D., Lovelock, D., G. McCallum, W., G. Osgood, B., Pasquale, A., Tecosky-Feldman, J., Thrash, J., R. Rhea, K., & W. Tucker, T. (2022). Applied Calculus. In Applied C
  14. Rahmani-Andebili, M. (2021). Calculus. In Calculus. Springer.
  15. Weir, M., R. Hass, J., E. Heil, C., & Bogacki, P. (2023). Thomas’ Calculus: Early Transcendentals, SI Units. In Thomas’ Calculus: Early Transcendentals, SI Units (Vol. 15). Pearson UK.

 

 

SCS 3107 Organic Chemistry for Engineers

E-books

  1. McIntosh, J. (2018). Organic Chemistry. In Organic Chemistry (Vol. 1). De Gruyter.
  2. Simek, J., & G. Wade, L. (2022). Organic Chemistry, Global Edition. In Organic Chemistry, Global Edition (Vol. 10). Pearson UK.
  3. Yurkanis Bruice, P. (2015). Essential Organic Chemistry, Global Edition. In Essential Organic Chemistry, Global Edition (Vol. 3). Pearson UK.
  4. Bansal, R. K. (2016). A Textbook of Organic Chemistry. NEW AGE International Publishers.
  5. Ramesh Chandra, Snigdha Singh, & Aarushi Singh. (2020). Basic Organic Chemistry. Arcler Press.

SPS 3102 Physics for Engineers II

E-books

  1. Jones, B., Field, S., & D Knight, R. (2023). College Physics: A Strategic Approach, Global Edition. In College Physics: A Strategic Approach, Global Edition (Vol. 4). Pearson UK.
  2. D Knight, R. (2022). Physics for Scientists and Engineers: A Strategic Approach with Modern Physics, Global Edition. In Physics for Scientists and Engineers: A Strategic Approach with Modern Physics, Global Edition (Vol. 5). Pearson UK.
  3. A. Serway, R., & W. Jewett, J. (2018). Physics for Scientists and Engineers with Modern Physics. In Physics for Scientists and Engineers with Modern Physics (Vol. 10). Cengage.
  4. C. Giancoli, D. (2023). Physics for Scientists & Engineers: with Modern Physics, Global Edition. In Physics for Scientists & Engineers: with Modern Physics, Global Edition (Vol. 5). Pearson UK.
  5. Jr.Ma, E. (2022). Principles & Practice of Physics, Global Edition. In Principles & Practice of Physics, Global Edition (Vol. 2). Pearson UK.
  6. C. Giancoli, D. (2016). Physics: Principles with Applications, Global Edition. In Physics: Principles with Applications, Global Edition (Vol. 7). Pearson UK.
  7. D. Young, H., & A. Freedman, R. (2021). University Physics with Modern Physics, Global Edition. In University Physics with Modern Physics, Global Edition (Vol. 14). Pearson UK.
  8. C. Giancoli, D. (2021). Physics for Scientists & Engineers (Chs 1-37): Pearson New International Edition PDF eBook. In Physics for Scientists & Engineers (Chs 1-37): Pearson New International Edition PDF eBook (Vol. 4). Pearson UK.

EME 3150 Engineering Drawing II

E-books

  1. Giesecke, F., Lockhart, S., M. Johnson, C., & Goodman, M. (2023). Technical Drawing with Engineering Graphics. In Technical Drawing with Engineering Graphics (Vol. 16). Pearson US.
  2. Liebenberg, G., & du Toit, L. (2021). N2 Engineering Drawing. In N2 Engineering Drawing (Vol. 1). FutureMan
  3. Rathnam, K. (2017). A First Course in Engineering Drawing. In A First Course in Engineering Drawing. Springer.
  4. Madsen, D. (2016). Engineering Drawing and Desig In Engineering Drawing and Design (Vol. 6). Cengage.
  5. Bert Bielefeld & Isabella Skiba. (2013). Basics Technical Drawing. Birkhäuser.

CIT 3102 Fundamentals of Computer Programming

E-books

  1. Manikanta Palakollu, S. (2020). Practical System Programming with C. In Practical System Programming with C (Vol. 1). Apress.
  2. Krishan Kumar Goyal. (2021). Concepts of Computer and C Programming: Vol. Second edition. Laxmi Publications Pvt Ltd.
  3. Jeff Szuhay. (2020). Learn C Programming: A Beginner’s Guide to Learning C Programming the Easy and Disciplined Way. Packt Publishing.
  4. Malhotra, D., & Malhotra, N. (2019). Data Structures and Program Design Using C: A Self-Teaching Introduction. Mercury Learning & Information.
  5. Dmitrović, S. (2024). Modern C for Absolute Beginners A Friendly Introduction to the C Programming Language. In Modern C for Absolute Beginners A Friendly Introduction to the C Programming Language (Vol. 2). Apress.
  6. Mailund, T. (2021). Pointers in C Programming. In Pointers in C Programming (Vol. 1). Apress.
  7. Gazi, O. (2023). Modern C Programming. In Modern C Programming. Springer.
  8. Szuhay, J. (2022). Learn C Programming. In Learn C Programming. Packt.
  9. Harwani, B. (2020). Practical C Programming. In Practical C Programming. Packt.

 

 

 

 

SME 3203 Statistics

E-books

  1. McClave, J., & T. Sincich, T. (2018). First Course in Statistics, A, Global Edition. In First Course in Statistics, A, Global Edition (Vol. 12). Pearson UK.
  2. Larson, R., & Farber, B. (2018). Elementary Statistics: Picturing the World, Global Edition. In Elementary Statistics: Picturing the World, Global Edition (Vol. 7). Pearson UK.
  3. Peck, R., & Case, C. (2023). Statistics. In Statistics (Vol. 3).
  4. Alandra, K. (2023). Introductory Statistics. Bentham Science Publishers.
  5. Walpole, R., L. Myers, S., E. Ye, K., & H. Myers, R. (2016). Probability & Statistics for Engineers & Scientists, Global Edition. In Probability & Statistics for Engineers & Scientists, Global Edition (Vol. 9). Pearson UK.
  6. Freund, J., A. Johnson, R., & Miller, I. (2017). Miller & Freund’s Probability and Statistics for Engineers, Global Edition. In Miller & Freund’s Probability and Statistics for Engineers, Global Edition (Vol. 9). Pearson UK.

EME 3151 Workshop Technology and Practice I

E-books

  1. Dong Won Jung. (2021). Metal Materials Processes and Manufacturing (Issue volume 1018). Trans Tech Publications Ltd.
  2. Black, B. (2004). Workshop Processes, Practices and Materials (3rd ed.). Routledge.
  3. Kalpakjian, S., & Schmid, S. (2022). Manufacturing Processes for Engineering Materials in SI Units. In Manufacturing Processes for Engineering Materials in SI Units (Vol. 6). Pearson UK.
  4. Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and Manufacturing Processes. In Materials and Manufacturing Processes. Springer.

 

EME 3152 Introduction to Material Science

E-books

  1. Feng Liu. (2015). Materials and Engineering Technology (Issue v. 719-720). Trans Tech Publications Ltd.
  2. Peng Sheng Wei. (2019). Advanced Materials and Engineering Materials VIII (Issue volume 814). Trans Tech Publications Ltd.
  3. Peng Sheng Wei. (2018). Advanced Materials and Engineering Materials VII (Issue VII). Trans Tech Publications Ltd.
  4. Peng Sheng Wei. (2020). Advanced Materials and Engineering Materials IX (Issue v.Volume 861). Trans Tech Publications Ltd.
  5.   N. Zelikman. (2018). Metallurgy of Rare Metals. SNOVA.

SME 3201 Calculus III

E-books

 

  1. Croft, A., & Davison, R. (2020). Mathematics for Engineers. In Mathematics for Engineers (Vol. 5). Pearson UK.
  2. Croft, A., & Davison, R. (2019). Mathematics for Engineers. In Mathematics for Engineers (Vol. 5). Pearson UK.
  3. Croft, A., & Davison, R. (2022). Mathematics for Engineers . In Mathematics for Engineers  (Vol. 4). Pearson UK.
  4. Gajjar, P. (2020). Foundation Calculus. In Foundation Calculus (Vol. 1). Bloomsbury Publishing UK.
  5. Rahmani-Andebili, M. (2023). Calculus II. In Calculus II. Springer.
  6. Rahmani-Andebili, M. (2023). Calculus III. In Calculus III. Springer.
  7. Strang, G., & “Jed” Herman, E. (2020). Calculus: Volume 1. In Calculus: Volume 1 (Vol. 1). Openstax.
  8. Strang, G., & “Jed” Herman, E. (2021). Calculus: Volume 2. In Calculus: Volume 2 (Vol. 1). Openstax.
  9. Strang, G., & “Jed” Herman, E. (2021). Calculus: Volume 3. In Calculus: Volume 3 (Vol. 1). Openstax.
  10. Zou, Y. (2018). Single Variable Calculus. In Single Variable Calculus (Vol. 1). De Gruyter.
  11. B. Thomas, G., D. Weir, M., & R. Hass, J. (2021). Thomas’ Calculus Early Transcendentals: Pearson New International Edition. In Thomas’ Calculus Early Transcendentals: Pearson New International Edition (Vol. 12). Pearson UK.
  12. L. Briggs, W., Cochran, L., & Gillett, B. (2016). Calculus: Early Transcendentals, Global Edition. In Calculus: Early Transcendentals, Global Edition (Vol. 2). Pearson UK.
  13. Hughes-Hallett, D., M. Gleason, A., E. Flath, D., Frazer Lock, P., P. Gordon, S., O. Lomen, D., Lovelock, D., G. McCallum, W., G. Osgood, B., Pasquale, A., Tecosky-Feldman, J., Thrash, J., R. Rhea, K., & W. Tucker, T. (2022). Applied Calculus. In Applied C
  14. Rahmani-Andebili, M. (2021). Calculus. In Calculus. Springer.

EME 3200 Engineering Thermodynamics I

E-books

  1. Moran, M., N. Shapiro, H., D. Boettner, D., & B. Bailey, M. (2018). Moran’s Principles of: Engineering Thermodynamics. In Moran’s Principles of: Engineering Thermodynamics (Vol. 9). Wiley.
  2. Whitman, A. (2023). Thermodynamics: Basic Principles and Engineering Applications. In Thermodynamics: Basic Principles and Engineering Applications (Vol. 2). Springer.
  3. Amirgaliyev, Y., & n, A. (2020). Thermodynamics and Energy In Thermodynamics and Energy Engineering (Vol. 1). IntechOpen.
  4. Sidebotham, G. (2022). An Inductive Approach to Engineering Thermodynamics. In An Inductive Approach to Engineering Thermodynamics. S

 

SME 3204 Ordinary Differential Equations

E-books

  1. Ümit Keskin, A. (2018). Ordinary Differential Equations for Engineers. In Ordinary Differential Equations for Engineers. Springer
  2. Precup, R. (2018). Ordinary Differential Equations. In Ordinary Differential Equations (Vol. 1). De Gruyter.
  3. Potter, M., & Struthers, A. (2019). Differential Equations. In Differential Equations (Vol. 2). Springer.
  4. Saff, E., David Snider, A., & Kent Nagle, R. (2018). Fundamentals of Differential Equations, Global Edition. In Fundamentals of Differential Equations, Global Edition (Vol. 9). Pearson UK.
  5. Moschandreou, T. (2018). Differential Equations Theory and Current Research. In Differential Equations Theory and Current Research. IntechOpen.

EME 3201 Engineering Mechanics I

E-books

  1. Bhavikatti, S. s. (2021). Problems & Solutions in Engineering Mechanics. NEW AGE International Publishers.
  2. Ping YI, Jun LIU, & Feng JIANG. (2022). Engineering Mechanics. EDP Sciences & Science Press.
  3. Sharma, V. (2018). Engineering Mechanics: Statics. Alpha Science Internation Limited.
  4. S. Bhavikatti. (2020). Engineering Mechanics: Vector and Classical Approach. NEW AGE International Publishers.
  5. Kiusalaas, J., & Pytel, A. (2016). Engineering Mechanics. In Engineering Mechanics (Vol. 4). Cengage.
  6. Hibbeler, R. (2022). Engineering Mechanics: Statics, SI Units. In Engineering Mechanics: Statics, SI Units (Vol. 15). Pearson UK.
  7. Baker, D., & Haynes, W. (2020). Engineering Statics: Open and Interactive. In Engineering Statics: Open and Interactive (Vol. 1). Daniel Baker and William Haynes.

EME 3202 Machine Elements

E-books

  1. Jiang, W. (2019). Analysis and Design of Machine Elements. John Wiley & Sons, Incorporated.
  2. Jurić, S. (2017). Plant Engineering. In Plant Engineering. IntechOpen.

EME 3203 Material Science

E-books

  1. Peng Sheng Wei. (2018). Advanced Materials and Engineering Materials VII (Issue VII). Trans Tech Publications Ltd.
  2. Peng Sheng Wei. (2019). Advanced Materials and Engineering Materials VIII (Issue volume 814). Trans Tech Publications Ltd.
  3. Peng Sheng Wei. (2020). Advanced Materials and Engineering Materials IX (Issue v.Volume 861). Trans Tech Publications Ltd.
  4. **e, P. (2012). An Introduction to the Properties of Engineering Materials. In An Introduction to the Properties of Engineering Materials. Springer.
  5. Shackelford, J. (2022). Introduction to Materials Science for Engineers, Global Edition. In Introduction to Materials Science for Engineers, Global Edition (Vol. 9). Pearson UK.
  6. Masaru Tanaka. (2022). Materials Science and Engineering: Materials and Their Application (Issue Vol. 27). Trans Tech Publications Ltd.

EME 3204 Workshop Technology and Practice II

E-books

  1. Dong Won Jung. (2021). Metal Materials Processes and Manufacturing (Issue volume 1018). Trans Tech Publications Ltd.
  2. Black, B. (2004). Workshop Processes, Practices and Materials (3rd ed.). Routledge.
  3. Kalpakjian, S., & Schmid, S. (2022). Manufacturing Processes for Engineering Materials in SI Units. In Manufacturing Processes for Engineering Materials in SI Units (Vol. 6). Pearson UK.
  4. Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and Manufacturing Processes. In Materials and Manufacturing Processes. Springer.

EME 3205 Solid and Structural Mechanics I

E-books

  1. Wickens, H. (2022). N5 Strength of Materials and Structures. In N5 Strength of Materials and Structures (Vol. 1). FutureManagers.
  2. Wickens, H. (2023). N6 Strength of Materials and Structures. In N6 Strength of Materials and Structures (Vol. 1). FutureManagers.
  3. Jaramillo S., H., & Arnaldo Avila and Can Chen, J. (2020). Strength of Materials. In Strength of Materia IntechOpen.
  4. Bhaskar, K., & K. Varadan, T. (2022). Strength of Materials. In Strength of Materials. Springer.
  5. Mittelstedt, C. (2023). Engineering Mechanics 2: Strength of Materials. In Engineering Mechanics 2: Strength of Materials. Springer.
  6. Mittelstedt, C. (2023). Engineering Mechanics 2: Strength of Materials. In Engineering Mechanics 2: Strength of Materials. Springe
  7. Bedford, A., & M. Liechti, K. (2019). Mechanics of Materials. In Mechanics of Materials (Vol. 2). Springer.
  8. Craig, R., . J., & M. Taleff, E. (2020). Mechanics of Materials. In Mechanics of Materials (Vol. 4). Wiley.
  9. Schmauder, S., Chen, W., Chen, C.-S., K. Chawla, K., Chawla, N., & Kagawa, Y. (2019). Handbook of Mechanics of Materials. In Handbook of Mechanics of Materials. Springer.

EEE 3215 Electrical Engineering I

E-books

  1. Hambley, A. (2018). Electrical Engineering: Principles & Applications, Global Edition. In Electrical Engineering: Principles & Applications, Global Edition (Vol. 7). Pearson UK
  2. Brown, K., Hughes, E., Hiley, J., & McKenzie-Smith, I. (2016). Hughes Electrical and Electronic Engineering. In Hughes Electrical and Electronic Engineering (Vol. 12). Pearson UK.
  3. Hieronymus Heyerdahl, (2021). Electrical Machines and Transformers, Custom eBook for NMBU . In Electrical Machines and Transformers, Custom eBook for NMBU (Vol. 1). Pearson UK.
  4. Bobby Rauf, S. (2020). Electrical Engineering Funda In Electrical Engineering Fundamentals (Vol. 1). Taylor & Francis.
  5. Hrabovcová, V., & Rafajdus and Pavol Makyš, P. (2020). Analysis of Electrical Machines. In Analysis of Electrical Machines. IntechOpen.
  6. Viktor Hacker & Christof Sumereder. (2019). Electrical Engineering: Fundamentals. De Gruyter Oldenbourg.

SME 3302 Partial Differential Equations

E-books

 

  1. Croft, A., & Davison, R. (2020). Mathematics for Engineers. In Mathematics for Engineers (Vol. 5). Pearson UK.
  2. Croft, A., & Davison, R. (2019). Mathematics for Engineers. In Mathematics for Engineers (Vol. 5). Pearson UK.
  3. Croft, A., & Davison, R. (2022). Mathematics for Engineers. In Mathematics for Engineers (Vol. 4). Pearson UK.
  4. Marin, M., & Öchsner, A. (2018). Essentials of Partial Differential Equations. In Essentials of Partial Differential Equations. Springer.
  5. Epstein, M. (2017). Partial Differential Equations. In Partial Differential Equations. Springer.
  6. Gupta, P. (2019). Topics in Partial Differential Equations: Vol. First edition. Laxmi Publications Pvt Ltd.

EME 3250 Engineering Mechanics II

E-books

  1. Bhavikatti, S. s. (2021). Problems & Solutions in Engineering Mechanics. NEW AGE International Publishers.
  2. Ping YI, Jun LIU, & Feng JIANG. (2022). Engineering Mechanics. EDP Sciences & Science Press.
  3. S. Bhavikatti. (2020). Engineering Mechanics: Vector and Classical Approach. NEW AGE International Publishers.
  4. Kiusalaas, J., & Pytel, A. (2016). Engineering Mechanics. In Engineering Mechanics (Vol. 4). Cengage.
  5. Hibbeler, R. (2022). Engineering Mechanics: Statics, SI Units. In Engineering Mechanics: Statics, SI Units (Vol. 15). Pearson UK.
  6. Baker, D., & Haynes, W. (2020). Engineering Statics: Open and Interactive. In Engineering Statics: Open and Interactive (Vol. 1). Daniel Baker and William Haynes.
  7. Hibbeler, R. (2023). Engineering Mechanics: Dynamics, SI Edition. In Engineering Mechanics: Dynamics, SI Edition (Vol. 15). Pearson UK.
  8. Hibbeler, R. (2016). Engineering Mechanics: Dynamics, SI Edition. In Engineering Mechanics: Dynamics, SI Edition (Vol. 14). Pearson UK
  9. To, C. W. S. (2016). Introduction to Dynamics and Control in Mechanical Engineering Systems. John Wiley & Sons, Incorporated.

EME 3251 Fluid Mechanics I

E-books

  1. Spurk, J., & Aksel, N. (2019). Fluid Mechanics. In Fluid Mechanics (Vol. 3). Springer.
  2. Agrawal, A., Prabu, T., Viswanathan, P., & Banerjee, J. (2021). Fluid Mechanics and Fluid Power. In Fluid Mechanics and Fluid Power. Springer.
  3. Liburdy, J. (2021). Intermediate Fluid Mechanics. In Intermediate Fluid Mechanics (Vol. 1). Open Oregon Educational Resources.
  4. Kumar, S. (2022). Fluid Mechanics (Vol. 1). In Fluid Mechanics (Vol. 1) (Vol. 4). Springer.
  5. Kumar, S. (2022). Fluid Mechanics (Vol. 2). In Fluid Mechanics (Vol. 2) (Vol. 4). Springer.
  6. Song, H. (2018). Engineering Fluid Mechanics. In Engineering Fluid Mechanics. Springer.
  7. Agrawal, A., Prabu, T., Viswanathan, P., & Banerjee, J. (2021). Fluid Mechanics and Fluid Power. In Fluid Mechanics and Fluid Power. Springer.
  8. Liu, P. (2021). A General Theory of Fluid Mechanics. In A General Theory of Fluid Mechanics. Springer.
  9. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 1. In Fluid Mechanics and Fluid Power, Volume 1. Springer.
  10. Bhattacharyya, S., & Cemal Benim, A. (2023). Fluid Mechanics and Fluid Power (Vol. 2). In Fluid Mechanics and Fluid Power (Vol. 2). Springer.
  11. Bhattacharyya, S., Verma, S., & R. Harikrishnan, A. (2023). Fluid Mechanics and Fluid Power (Vol. 3). In Fluid Mechanics and Fluid Power (Vol. 3). Springer.
  12. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 4. In Fluid Mechanics and Fluid Power, Volume 4. Springer.
  13. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 5. In Fluid Mechanics and Fluid Power, Volume 5. Springer.
  14. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 6. In Fluid Mechanics and Fluid Power, Volume 6. Springer.
  15. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2023). Fluid Mechanics and Fluid Power, Volume 7. In Fluid Mechanics and Fluid Power, Volume 7. Springer.
  16. Hibbeler, R. (2019). Fluid Mechanics in SI Units. In Fluid Mechanics in SI Units (Vol. 2). Pearson UK.
  17. Singh, V., V. Timbadiya, P., L. Patel, P., & Barman, B. (2023). Fluid Mechanics and Hydraulics. In Fluid Mechanics and Hydraulics. Springer.
  18. Longo, S., Giovanna Tanda, M., & Chiapponi, L. (2020). Problems in Hydraulics and Fluid Mechanics. In Problems in Hydraulics and Fluid Mechanics. Springer.

 

EME 3252 Solid and Structural Mechanics II

E-books

  1. Wickens, H. (2022). N5 Strength of Materials and In N5 Strength of Materials and Structures (Vol. 1). FutureManagers.
  2. Wickens, H. (2023). N6 Strength of Materials and Structures. In N6 Strength of Materials and Structures (Vol. 1). FutureManagers.
  3. Jaramillo S., H., & Arnaldo Avila and Can Chen, J. (2020). Strength of Materials. In Strength of Materials. IntechOpen.
  4. Bhaskar, K., & K. Varadan, T. (2022). Strength of Materials. In Strength of Materials. Springer.
  5. Mittelstedt, C. (2023). Engineering Mechanics 2: Strength of Materials. In Engineering Mechanics 2: Strength of Materials. Springer.
  6. Mittelstedt, C. (2023). Engineering Mechanics 2: Strength of Materials. In Engineering Mechanics 2: Strength of Materials. Springer.
  7. Bedford, A., & M. Liechti, K. (2019). Mechanics of Materials. In Mechanics of Materials (Vol. 2). Springer.
  8. Craig, R., . J., & M. Taleff, E. (2020). Mechanics of Materials. In Mechanics of Materials (Vol. 4). Wiley.
  9. Schmauder, S., Chen, W., Chen, C.-S., K. Chawla, K., Chawla, N., & Kagawa, Y. (2019). Handbook of Mechanics of Materials. In Handbook of Mechanics of Materials. Springer.

 

 

 

EME 3253 Engineering Thermodynamics II

E-books

  1. Moran, M., N. Shapiro, H., D. Boettner, D., & B. Bailey, M. (2018). Moran’s Principles of: Engineering Thermodynamics. In Moran’s Principles of: Engineering Thermodynamics (Vol. 9). Wiley.
  2. Whitman, A. (2023). Thermodynamics: Basic Principles and Engineering Applications. In Thermodynamics: Basic Principles and Engineering Applications (Vol. 2). Springer.
  3. Amirgaliyev, Y., & n, A. (2020). Thermodynamics and Energy Engineering. In Thermodynamics and Energy Engineering (Vol. 1). IntechOpen.
  4. Sidebotham, G. (2022). An Inductive Approach to Engineering Thermodynamics. In An Inductive Approach to Engineering Thermodynamics. Springer.

EME 3254 Workshop Technology and Practice III

E-books

  1. Dong Won Jung. (2021). Metal Materials Processes and Manufacturing (Issue volume 1018). Trans Tech Publications Ltd.
  2. Black, B. (2004). Workshop Processes, Practices and Materials (3rd ed.). Routledge.
  3. Kalpakjian, S., & Schmid, S. (2022). Manufacturing Processes for Engineering Materials in SI Units. In Manufacturing Processes for Engineering Materials in SI Units (Vol. 6). Pearson UK.
  4. Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and Manufacturing Processes. In Materials and Manufacturing Processes. Springer.

EEE 3216 Electrical Engineering II

E-books

  1. Hambley, A. (2018). Electrical Engineering: Principles & Applications, Global Edition. In Electrical Engineering: Principles & Applications, Global Edition (Vol. 7). Pearson UK.
  2. Brown, K., Hughes, E., Hiley, J., & McKenzie-Smith, I. (2016). Hughes Electrical and Electronic Engineering. In Hughes Electrical and Electronic Engineering (Vol. 12). Pearson UK.
  3. Hieronymus Heyerdahl, P. (2021). Electrical Machines and Transformers, Custom eBook for NMBU . In Electrical Machines and Transformers, Custom eBook for NMBU (Vol. 1). Pearson UK.
  4. Bobby Rauf, S. (2020). Electrical Engineering Fundamentals. In Electrical Engineering Fundamentals (Vol. 1). Taylor & Francis.
  5. Hrabovcová, V., & Rafajdus and Pavol Makyš, P. (2020). Analysis of Electrical Machines. In Analysis of Electrical Machines. IntechOpen.

EMT 3255 Internal Attachment

E-books

  1. Dong Won Jung. (2021). Metal Materials Processes and Manufacturing (Issue volume 1018). Trans Tech Publications Ltd.
  2. Black, B. (2004). Workshop Processes, Practices and Materials (3rd ed.). Routledge.
  3. Kalpakjian, S., & Schmid, S. (2022). Manufacturing Processes for Engineering Materials in SI Units. In Manufacturing Processes for Engineering Materials in SI Units (Vol. 6). Pearson UK.
  4. Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and Manufacturing Processes. In Materials and Manufacturing Processes. Springer.

SME 3350 Probability and Statistics

E-Books

  1. Kolovsky, M. , Evgrafov, A. N., Semenov, Yu. A., & Slousch, A. V. (2012). Advanced Theory of Mechanisms and Machines. In Advanced Theory of Mechanisms and Machines. Springer.
  2. Irschik, H., Krommer, M., P. Matveenko, V., & Belyaev, A. (2021). Dynamics and Control of Advanced Structures and Machines. In Dynamics and Control of Advanced Structures and Machines. Springer.
  3. Szeidl, G., & Péter Kiss, L. (2020). Mechanical Vibrations. In Mechanical Vibrations. Springer.
  4. Schmitz, T., & Scott Smith, K. (2020). Mechanical Vibrations. In Mechanical Vibrations (Vol. 2). Springer.
  5. Chandra Luintel, M. (2023). Textbook of Mechanical Vibrations. In Textbook of Mechanical Vibrations. Springer.

 

EME 3302 Metrology

E-Books

  1. Heather A. Wade. (2022). The ASQ Metrology Handbook: Vol. Third edition. ASQ Quality Press.
  1. Singh, S., Prakash, C., Krolczyk, G., & Pramanik, A. (2020). Advances in Metrology and Measurement of Engineering Surfaces. In Advances in Metrology and Measurement of Engineering Surfaces. Springer.
  2. Gao, W. (2019). Metrology. In Metrology. Springer
  3. Singh, S., Prakash, C., Krolczyk, G., & Pramanik, A. (2020). Advances in Metrology and Measurement of Engineering Surfaces. In Advances in Metrology and Measurement of Engineering Surfaces. Springer.
  4. Kumar, H., Yadav, S., K. Aswal, D., Takatsuji, T., & Rachakonda, P. (2023). Handbook of Metrology and Applications. In Handbook of Metrology and Applications. Springer.

EME 3303 Solid and Structural Mechanics III

E-Books

  1. Wickens, H. (2022). N5 Strength of Materials and Structures. In N5 Strength of Materials and Structures (Vol. 1). FutureManagers.
  2. Wickens, H. (2023). N6 Strength of Materials and Structures. In N6 Strength of Materials and Structures (Vol. 1). FutureManagers.
  3. Jaramillo S., H., & Arnaldo Avila and Can Chen, J. (2020). Strength of Materials. In Strength of Materials. IntechOpen.
  4. Bhaskar, K., & K. Varadan, T. (2022). Strength of Materials. In Strength of Materials. Springer.
  5. Bhaskar, K., & K. Varadan, T. (2022). Strength of Materials. In Strength of Materials. Springer.
  6. Bedford, A., & M. Liechti, K. (2019). Mechanics of Materials. In Mechanics of Materials (Vol. 2). Springer.
  7. Craig, R., . J., & M. Taleff, E. (2020). Mechanics of Materials. In Mechanics of Materials (Vol. 4). Wiley.
  8. Schmauder, S., Chen, W., Chen, C.-S., K. Chawla, K., Chawla, N., & Kagawa, Y. (2019). Handbook of Mechanics of Materials. In Handbook of Mechanics of Materials. Sprin
  9. Hibbeler, R. (2023). Mechanics of Materials, SI Edition. In Mechanics of Materials, SI Edition (Vol. 11). Pearson UK.
  1. Fadi Hage Chehade, Chen Hu, & Ke Wang. (2022). Applied Mechanics and Engineering (Issue Volume 904). Trans Tech Publications Ltd.
  1. Mittelstedt, C. (2023). Engineering Mechanics 2: Strength of Materials. In Engineering Mechanics 2: Strength of Materials. Springer.

 

EME 3304 Fluid Mechanics II

E-Books

  1. Spurk, J., & Aksel, N. (2019). Fluid Mechanics. In Fluid Mechanics (Vol. 3). Springer.
  2. Liburdy, J. (2021). Intermediate Fluid Mechanics. In Intermediate Fluid Mechanics (Vol. 1). Open Oregon Educational Resou
  3. Kumar, S. (2022). Fluid Mechanics (Vol. 2). In Fluid Mechanics (Vol. 2) (Vol. 4). Springer.
  4. Kumar, S. (2022). Fluid Mechanics (Vol. 1). In Fluid Mechanics (Vo 1) (Vol. 4). Springer.
  5. Singh, V., V. Timbadiya, P., L. Patel, P., & Barman, B. (2023). Fluid Mechanics and Hydraulics. In Fluid Mechanics and Hydraulics. Springer.
  6. Agrawal, A., Prabu, T., Viswanathan, P., & Banerjee, J. (2021). Fluid Mechanics and Fluid Power. In Fluid Mechanics and Fluid Power. Spri
  7. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 1. In Fluid Mechanics and Fluid Power, Volume 1. Springer.
  8. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 4. In Fluid Mechanics and Fluid Power, Volume 4. Springer.
  9. Subudhi, S., Mohan Singh, K., Dutta,, & Kumar Singh, N. (2023). Fluid Mechanics and Fluid Power, Volume 7. In Fluid Mechanics and Fluid Power, Volume 7. Springer.
  10. Bhattacharyya, S., & Chattopadhyay, H. (2023). Fluid Mechanics and Fluid Power ( 1). In Fluid Mechanics and Fluid Power (Vol. 1). Springer.
  11. Bhattacharyya, S., & Cemal Benim, A. (2023). Fluid Mechanics and Fluid Power (Vol. 2). In Fluid Mechanics and Fluid Power  (Vol. 2). Springer.
  12. Bhattacharyya, S., Verma, S., & R. Harikrishnan, A. (2023). Fluid Mechanics and Fluid Power (Vol. 3). In Fluid Mechanics and Fluid Power (Vol. 3). Springer.
  13. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 3. In Fluid Mechanics and Fluid Power, Volume 3. Springer.
  14. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 5. In Fluid Mechanics and Fluid Power, Volume 5. Springer.
  15. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 2. In Fluid Mechanics and Fluid Power, Volume 2. Springer.
  16. Subudhi, S., Mohan Singh, K., Dutta, S., & Kumar Singh, N. (2024). Fluid Mechanics and Fluid Power, Volume 6. In Fluid Mechanics and Fluid Power, Volume 6. Springer.

EME 3305 Machine Design I

E-Books

  1. Paulo Davim, J., Kyratsis, P., & Efkolidis, N. (2022). Advances in Product Design Engineering. In Advances in Product Design Engineering. Springer.
  2. Zubair, M. (2021). Practical Applications in Reliability Engin In Practical Applications in Reliability Engineering. IntechOpen.
  3. Bracke, S. (2024). Reliability Engineering. In Reliability Engineering. Springer.
  4. Li, L., Sun, Y., & Tiniakov, D. (2023). Reliability Engineering. In Reliability Engineering. Springer.
  5. Öchsner, A., & Altenbach, H. (2019). Engineering Design Applications II. In Engineering Design Applications II. Spri
  6. Öchsner, A., & Altenbach, H. (2022). Engineering Design Applications IV. In Engineering Design Applications IV. Springer.
  7. Öchsner, A., & Altenbach, H. (2020). Engineering Design Applications III. In Engineering Design Applications III. Springer.

EME 3306 Composite Materials

E-BOOKS

  1. Clyne, T., & Hull, D. (2019). An Introduction to Composite Materials. In An Introduction to Composite Materials (Vol. 3). Cambridge University Press.
  2. Asaduzzaman Chowdhury, M., Luis Rivera Armenta, J., Muzibur Rahman, M., & Asiri and Inamuddin, A. (2021). Composite Materials. In Composite Materials. IntechOpen.
  3. Singh, R., & Slipher, G. (2019). Mechanics of Composite and Multi-functional Materials, Volume 5. In Mechanics of Composite and Multi-functional Materials, Volume 5. Springer.
  4. Chalivendra, V., & P. Singh, R. (2021). Mechanics of Composite, Hybrid and Multifunctional Materials , Volume 6. In Mechanics of Composite, Hybrid and Multifunctional Materials , Volume 6. Springer.

 

SME 3403 Numerical Methods

E-Books

  1. Consortium for Foundation Mathematics, T. (2019). Mathematics in Action: An Introduction to Algebraic, Graphical, and Numerical Problem Solving. In Mathematics in Action: An Introduction to Algebraic, Graphical, and Numerical Problem Solving (Vol. 6). Pear
  2. Rao, S. (2021). Direct Numerical Simulations An Introduction and Applications. In Direct Numerical Simulations An Introduction and Applications. IntechOpen.
  3. Allahviranloo, T., & Esfandiari, A. (2021). A Course on Integral Equations with Numerical Analysis. In A Course on Integral Equations with Numerical Analysis. Springer.
  4. Pehcevski, J. (2023). Basics for Numerical and Symbolic Computation. Arcler Press.
  5. Allahviranloo, T., & Esfandiari, A. (2021). A Course on Integral Equations with Numerical Analysis. In A Course on Integral Equations with Numerical Analysis. Springer.

EEE 3317 Electronics

E-Books

  1. Asadi, F. (2022). Simulation of Power Electronics Circuits with MATLAB®/Simulink®. In Simulation of Power Electronics Circuits with MATLAB®/Simulink® (Vol. 1). Apress.
  1. Westcott, S., & Westcott, J. R. (2020). Basic Electronics: Theory and Practice: Vol. Third edition. Mercury Learning & Information.
  1. Pandey, O. (2022). Electronics Engineering. In Electronics Engineering (Vol. 2). Springer.
  2. Bartlett, J. (2020). Electronics for Beginners. In Electronics for Beginners (Vol. 1). Apress.
  1. Viktor Hacker & Christof Sumereder. (2019). Electrical Engineering: Fundamentals. De Gruyter Oldenbourg.
  1. Bobby Rauf, S. (2020). Electrical Engineering Fundamentals. In Electrical Engineering Fundamentals (Vol. 1). Taylor & Francis.

 

 

EME 3350 Mechanical System Design

E-Books

  1. Woo, S. (2023). Design of Mechanical Systems. In Design of Mechanical Systems. Springer.
  2. Woo, S. (2019). Reliability Design of Mechanical Systems. In Reliability Design of Mechanical Systems (Vol. 2). Springer.
  3. Öchsner, A., & Altenbach, H. (2020). Engineering Design Applications III. In Engineering Design Applications III. Springer.
  4. Öchsner, A., & Altenbach, H. (2022). Engineering Design Applications IV. In Engineering Design Applications IV. Springer.
  5. Öchsner, A., & Altenbach, H. (2019). Engineering Design Applications II. In Engineering Design Applications II. Springer.
  6. Li, L., Sun, Y., & Tiniakov, D. (2023). Reliability Engineering. In Reliability Engineering. Springer.
  7. Bracke, S. (2024). Reliability Engineering. In Reliability Engineeri Springer.
  8. Ugural, A. (2020). Mechanical Engineering Design. In Mechanical Engineering Design (Vol. 3). Taylor & Francis.

EME 3351 Solid and Structure Mechanics IV

E-Books

  1. Wickens, H. (2022). N5 Strength of Materials and Structures. In N5 Strength of Materials and Structures (Vol. 1). FutureManagers.
  2. Wickens, H. (2023). N6 Strength of Materials and Structures. In N6 Strength of Materials and Structures (Vol. 1). FutureManagers.
  3. Jaramillo S., H., & Arnaldo Avila and Can Chen, J. (2020). Strength of Materials. In Strength of Materials. IntechOpen.
  4. Bhaskar, K., & K. Varadan, T. (2022). Strength of Materials. In Strength of Materials. Springer.
  5. Singh, D. (2020). Strength of Materials. In Strength of Materials (Vol. 4). Springer.
  6. Bedford, A., & M. Liechti, K. (2019). Mechanics of Materials. In Mechanics of Materials (Vol. 2). Springer.
  7. Craig, R., . J., & M. Taleff, E. (2020). Mechanics of Materials. In Mechanics of Materials (Vol. 4). Wiley.
  8. Schmauder, S., Chen, W., Chen, C.-S., K. Chawla, K., Chawla, N., & Kagawa, Y. (2019). Handbook of Mechanics of Materials. In Handbook of Mechanics of Materials. Springer.
  1. Fadi Hage Chehade, Chen Hu, & Ke Wang. (2022). Applied Mechanics and Engineering (Issue Volume 904). Trans Tech Publications Ltd.
  1. Mittelstedt, C. (2023). Engineering Mechanics 2: Strength of Materials. In Engineering Mechanics 2: Strength of Materials.

 

 

 

EME 3352 Mechanical of Machines II

E-Books

  1. Hrabovcová, V., & Rafajdus and Pavol Makyš, P. (2020). Analysis of Electrical Machines. In Analysis of Electrical Machines. IntechOpen.
  2. Szeidl, G., & Péter Kiss, L. (2020). Mechanical Vibrations. In Mechanical Vibrations. Springer.
  3. Schmitz, T., & Scott Smith, K. (2020). Mechanical Vibrations. In Mechanical Vibrations (Vol. 2). Springer.
  4. Chandra Luintel, M. (2023). Textbook of Mechanical Vibrations. In Textbook of Mechanical Vibrations. Springer.

EME 3353 Engineering Thermodynamics III

E-Books

  1. Cesar Philippi, P. (2024). Thermodynamics. In Thermodynamics. Springer.
  2. Sidebotham, G. (2022). An Inductive Approach to Engineering Thermodynamics. In An Inductive Approach to Engineering Thermodynamics. Springer.
  3. Ermolaev, V. (2024). Thermal Engineering. In Thermal Engineering. Springer.
  4. Kumar, S. (2022). Thermal Engineering Volume 1. In Thermal Engineering Volume 1. Springer
  5. Kumar, S. (2022). Thermal Engineering Volume 2. In Thermal Engineering Volume 2. Springer.
  6. Cesar Philippi, P. (2024). In Thermodynamics. Springer.

EME 3354 Fluid Mechanics III

E-Books

  1. Spurk, J., & Aksel, N. (2019). Fluid Mechanics. In Fluid Mechanics (Vol. 3). Springer.
  2. Kumar, S. (2022). Fluid Mechanics (Vol. 1). In Fluid Mechanics (Vol. 1) (Vol. 4). Springer.
  3. Singh, V., V. Timbadiya, P., L. Patel, P., & Barman, B. (2023). Fluid Mechanics and Hydraulics. In Fluid Mechanics and Hydraulics. Springer.

 

EME 3355 Machine Design II

E-Book

  1. Paulo Davim, J., Kyratsis, P., & Efkolidis, N. (2022). Advances in Product Design Engineering. In Advances in Product Design Engineering. Springer.
  2. Öchsner, A., & Altenbach, H. (2020). Engineering Design Applications III. In Engineering Design Applications III. Springer.
  3. Öchsner, A., & Altenbach, H. (2022). Engineering Design Applications IV. In Engineering Design Applications IV. Springer.
  4. Öchsner, A., & Altenbach, H. (2019). Engineering Design Applications II. In Engineering Design Applications II. Springer.
  5. Li, L., Sun, Y., & Tiniakov, D. (2023). Reliability Engineering. In Reliability Engineering. Springer.
  6. Bracke, S. (2024). Reliability Engineering. In Reliability Engineering. Springer.

EME 3356 External Industrial Attachment I

ECU 3400 Research Methodology

EMT 3400      Hydraulic Power and Control

Fluid Mechanics Units

EBOOKS

 

  1. Manring, Noah D., and Roger C. Fales. Hydraulic Control Systems. Newark, UNITED STATES: John Wiley & Sons, Incorporated, 2019. .

 

  1. Turner, Ian C. Engineering Applications of Pneumatics and Hydraulics. Milton,

 

  1. UNITEDKINGDOM:CRCPressLLC,2020.

 

  1. Hamill, L. (2017). Understanding Hydr In Understanding Hydraulics (Vol. 3). Bloomsbury Publishing UK.
  2. Ding, R., & Cheng, M. (2024). Independent Metering Electro-Hydraulic Control System. In Independent Metering Electro-Hydraulic Control Syst Springer.
  3. Singh, V., V. Timbadiya, P., L. Patel, P., & Barman, B. (2023). Fluid Mechanics and Hydraulics. In Fluid Mechanics and Hydraulics. Springer.
  4. Abdus Salam, Md. (2022). Fundamentals of Pneumatics and Hydraulics. In Fundamentals of Pneumatics and Hydraulics. Springer.
  5. Hedegaard Hansen, A. (2023). Fluid Power Systems. In Fluid Power Systems. Springer.

 

EME 3401 Mechanics of Machines III

EBOOOKS

 

  1. Kolovsky, M. Z., Evgrafov, A. N., Semenov, Yu. A., & Slousch, A. V. (2012). Advanced
  2. Theory of Mechanisms and Machines. In Advanced Theory of Mechanisms and Machines.
  3. Szeidl, G., & Péter Kiss, L. (2020). Mechanical Vibrations. In Mechanical Vibrations. Springer

 

  1. Shabana, A. (2018). Theory of Vibration. In Theory of Vibration (Vol. 3). Springer.

 

  1. Schmauder, S., Chen, W., Chen, C.-S., K. Chawla, K., Chawla, N., & Kagawa, Y. (2019). Handbook of Mechanics of Materials. In Handbook of Mechanics of Materials. Springer.

 

EME 3402 Computer Aided Design & Computer Aided Manufacturing (CAD/CAM)

EBOOKS

 

  1. Bordino, A. (2022). Autodesk Inventor 2023 Cookbook. In Autodesk Inventor 2023 Cookbook. Packt.
  2. Kishore, T. (2017). Learn Autodesk Inventor 2018 Basics. In Learn Autodesk Inventor 2018 Basics (Vol. 1). Apress.
  3. Yasser Shoukry and Jaiprakash Pandey. Practical Autodesk AutoCAD 2021 and AutoCAD LT 2021 : A No-Nonsense, Beginner’s Guide to Drafting and 3D Modeling with Autodesk AutoCAD. Birmingham: Packt Publishing, 2020.
  4. Research and Markets. “Research and Markets: AutoCAD 2012 and AutoCAD LT 2012 Bible.” Business Wire (English), November 30, 2011.
  5. “New Technology in Computer Aided Design, Computer Aided Manufacturing, Computer Aided Engineering Analytic Methodology, Automated and High Speed Mechanical System.” I-Manager’s Journal on Computer Science 5, no. 3 (September 2017): 6–53. .
  6. Bi, Zhuming, and Xiaoqin Wang. Computer Aided Design and Manufacturing. Newark, UNITED KINGDOM: John Wiley & Sons, Incorporated, 202
  7. Sufen Wang and Chong Qin. “Computer Aided Design and Manufacturing of Connecting Rod Mold.” Computer-Aided Design & Applications 18 (November 2, 2021): 65–74.
  8. Machado, J., Burduk, A., D. L. Batako, A., Wyczółkowski, R., Dostatni, E., & Rojek, I. (2023). Intelligent Systems in Production Engineering and Maintenance III. In Intelligent Systems in Production Engineering and Maintenance III. Springer.
  9. Burduk, A., & Mazurkiewicz, D. (2017). Intelligent Systems in Production Engineering and Maintenance – ISPEM 2017. In Intelligent Systems in Production Engineering and Maintenance – ISPEM 2017. Springer.
  10. Paulo Davim, J. (2021). Mechanical and Industrial Engineering. In Mechanical and Industrial Engineering. Springer.

 

EEE 3403 Programmable Logic Controllers (PLC)

EBOOKS

 

  1. A. Rehg, J., & J. Sartori, G. (2013). Programmable Logic Controllers. In Programmable Logic Controllers (Vol. 2). Pearson UK.
  2. Dey, Chanchal, and Sunit Kumar Se Industrial Automation Technologies. Milton, UNITED
  3. KINGDOM: Taylor & Francis Group, 2020.

 

  1. Rahmani-Andebili, M. (2022). Feedback Control Systems Analysis and Design. In Feedback
  2. Control Systems Analysis and Springer.
  3. Salcic, Z., & Smailagic, A. (2012). Digital Systems Design and Prototyping Using Field Programmable Logic. In Digital Systems Design and Prototyping Using Field Programmable Logic. Springer.

 

  1. Wang,   (2013).  Mechatronics  and  Automatic  Control  Systems.  In

 

  1. Mechatronics and Automatic Control Systems. Springer.

 

  1. Franklin, G., Powell, J., & F. Emami-Naeini, A. (2021). Feedback Control of Dynamic Systems, Global Edition. In Feedback Control of Dynamic Systems, Global Edition (Vol. 7). Pearson UK.

 

EME 3403 Fluids Mechanics IV

EBOOKS

 

  1. Spurk, J., & Aksel, N. (2019). Fluid Mechanics. In Fluid Mechanics (Vol. 3). Springer.
  2. Babu, V. (2021). Fundamentals of Incompressible Fluid Flow. In Fundamentals of Incompressible Fluid Flow. Springer.

 

  1. Maliska, C. (2023). Fundamentals of Computational Fluid Dynamics. In Fundamentals of Computational Fluid Dynamics. Springer.

 

  1. “Fluid Mechanics: EBSCOhost.” Accessed July 24, 2024.

 

  1. Singh, V., V. Timbadiya, P., L. Patel, P., & Barman, B. (2023). Fluid Mechanics and Hydraulics. In Fluid Mechanics and Hydraulics. Springer.
  2. Song, H. (2018). Engineering Fluid Mechanics. In Engineering Fluid Mechanics. Springer.

 

  1. Agrawal, A., Prabu, T., Viswanathan, P., & Banerjee, J. (2021). Fluid Mechanics and Fluid Power. In Fluid Mechanics and Fluid Power. Springer.
  2. Deville, M. (2022). An Introduction to the Mechanics of Incompressible Fluids. In An Introduction to the Mechanics of Incompressible Fluids. Springer.

 

  1. Longo, S., Giovanna Tanda, M., & Chiapponi, L. (2020). Problems in Hydraulics and Fluid Mechanics. In Problems in Hydraulics and Fluid Mechanics. Springer.
  2. Bennett, Gary F. “Handbook of Compressed Gases (Book Review) (Undetermined).” Journal of Hazardous Materials 30 (March 1992): 101–2.
  3. Johnson, R. (2016). Handbook of Fluid Dynamics. In Handbook of Fluid Dynamics (Vol. 2). Taylor & Francis.

 

  1. Tsiklis, D. (2012). Handbook of Techniques in High-Pressure Research and Engineering. In Handbook of Techniques in High-Pressure Research and Engineering. Springer.

EME 3404 Industrial Management

EBOOKS

 

  1. Stradling, L. (2010). Production Management for TV and Film. In Production Management for TV and Film (Vol. 1). Bloomsbury Publishing UK.
  2. Slack, N., & Brandon-Jones, A. (2021). Operations and Process Management. In Operations and Process Management (Vol. 6). Pearson UK.
  3. Rao, M.E. Thukaram. Industrial Management. Mumbai, INDIA: Global

Media, 2009.

  1. McFarland, Dalton E. “Management in the Industrial World: An International Analysis.” Administrative Science Quarterly 5, no. 2 (September 1960): 320–23.
  2. Foo, C.-T. (2023). Handbook of Chinese Management. In Handbook of Chinese Management. Springer.
  3. He, J. (2023). Principles of Engineering Management. In Principles of Engineering Management. Springer.
  4. de Boer, L., & Houman Andersen, P. (2018). Operations Management and Sustainability. In Operations Management and Sustainability. Springer.
  5. Gupta, A., Sachdeva, A., Kumar, P., P Yadav, O., & K Garg, R. (2020). Operations Management and Systems Engineering. In Operations Management and Systems Engineering. Springer.

 

EME 3405 Production Technology I

EBOOKS

 

  1. Brooks-Harris, J., & R. Stock-Ward, S. (1999). Workshops. In Workshops (Vol. 1). SAGE Publications US.

 

  1. Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and Manufacturing Processes. In Materials and Manufacturing Springer.
  2. Brecher, C. (2014). Advances in Production Technology. In Advances in Production Technology (Vol. 2015). Springer Open.

 

  1. Paulo Davim, J., Zindani, D., & Kumar, K. (2018). Advanced Machining and Manufacturing Processes. In Advanced Machining and Manufacturing Processes. Springer.

 

  1. Phillips, David   Welding  Engineering:  An  Introduction.  Newark,  UNITED

KINGDOM: John Wiley & Sons, Incorporated, 2016.

  1. Gong, S., Liu, J., Yang, G., & Xu, H. (2022). Electron Beam Wire Deposition Technology and Its Applicat In Electron Beam Wire Deposition Technology and Its Application. Springer.

 

EME 3406 Engine and Power Train

E-BOOKS

 

  1. Reif, K. (2014). Fundamentals of Automotive and Engine Technology. In Fundamentals of Automotive and Engine Technology. Springer.
  2. Lejda and Pawel Wos, K. (2012). Fuel Injection in Automotive Engineering. In Fuel Injection in Automotive Engineering. IntechOpen.
  3. Lejda and Pawel Wos, K. (2012). Internal Combustion Engines. In Internal Combustion Engines. IntechOpen.

 

  1. Du, M. (2022). Autonomous Vehicle Technology. In Autonomous Vehicle Technology. Springer.

 

  1. Gilles, T. (2017). Automotive Engines. In Automotive Engines (Vol. 8). Cengage.

 

  1. McAllister, S., Chen, J.-Y., & Carlos Fernandez-Pello, A. (2011). Fundamentals of Combustion Processes. In Fundamentals of Combustion Processes. Springer.

EME 3407 Plant Engineering I

EBOOKS

 

  1. He, J. (2023). Principles of Engineering Management. In Principles of Engineering Management. Springer.

 

  1. Conway, D. A. “Introduction to Industrial Engineering & Management Science (Book).” European Journal of Operational Research 3, no. 2 (March 1979): 164–164.
  2. Torbacke, Marika, �sa Kassman Rudolphi, and Elisabet Kassfeldt. Lubricants: Introduction to Properties and Performance. Newark, UNITED KINGDOM: John Wiley & Sons, Incorporated, 2014.

 

  1. Engineering Tribology: EBSCOhost.” Accessed July 24, 2024.
  2. 40f5-aa69-76837cddcd29%40redis&bdata=JnNpdGU9ZWhvc3QtbGl2ZQ%3

 

  1. d%3d#AN=486047&db=nlebk.

EME 3450 Heat Transfer

E-BOOKS

  1. Moran, M., N. Shapiro, H., D. Boettner, D., & B. Bailey, M. (2018). Moran’s Principles of: Engineering Thermodynamics. In Moran’s Principles of: Engineering Thermodynamics (Vol. 9). Wiley.
  2. Amirgaliyev, Y., & n, A. (2020). Thermodynamics and Energy Engineering. In Thermodynamics and Energy Engineering (Vol. 1). IntechOpen.
  3. Whitman, A. (2023). Thermodynamics: Basic Principles and Engineering Applications. In Thermodynamics: Basic Principles and Engineering Applications (Vol. 2). Springer.
  4. Cesar Philippi, P. (2024). Thermodynamics. In Thermodynamics. Springer.
  5. Hutter, K., & Wang, Y. (2018). Fluid and Thermodynamics. In Fluid and Thermodynamics. Springer
  6. Schmidt, A. (2022). Technical Thermodynamics for Engineers. In Technical Thermodynamics for Engineers (Vol. 2). Springer
  7. Venkateshan, S. P. (2021). Heat Transfer. In Heat Transfer (Vol. 3). Springer.
  8. Mobedi, M., & Gediz Ilis, G. (2023). Fundamentals of Heat Transfer. In Fundamentals of Heat Transfer. Springer.
  9. Karwa, R. (2020). Heat and Mass Transfer. In Heat and Mass Transfer (Vol. 2). Springer.
  10. Kumar Saha, S., Ranjan, H., Sruthi Emani, M., & Kumar Bharti, A. (2019). Introduction to Enhanced Heat Transfer. In Introduction to Enhanced Heat Transfer. Springer.
  11. Newaz Kazi, S. (2023). Heat Transfer Fundamentals, Enhancement and Applications. In Heat Transfer Fundamentals, Enhancement and Applications. IntechOpen.
  12. Balaji, C., Yadav, R., & P. Venkateshan, S. (2022). Radiative Heat Transfer in Participating Media. In Radiative Heat Transfer in Participating Media. Springer.
  13. Giulio Lorenzini. (2018). Engineering Thermodynamics, Heat Transfer and Fluid Flow in Natural and Industrial Processes (Issue volume 388). Trans Tech Publications Ltd.
  14. Murugan, S. (2014). Engineering Thermodynamics. Alpha Science Internation Limited.

EME 3451 Material Forming Processes

E-BOOKS

Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and Manufacturing Processes. In Materials and Manufacturing Processes. Springer.

  1. Groover, M. (2021). Fundamentals of Modern Manufacturing Materials, Processes and Systems, International Adaptation. In Fundamentals of Modern Manufacturing Materials, Processes and Systems, International Adaptation (Vol. 7). Wiley.

Kalpakjian, S., & Schmid, S. (2022). Manufacturing Processes for Engineering Materials in SI Units. In Manufacturing Processes for Engineering Materials in SI Units (Vol. 6). Pearson UK.

 

  1. Agarwal, R. (2023). Recent Advances in Manufacturing Engineering and Processes. In Recent Advances in Manufacturing Engineering and Processes. Springer.

Luis García Alcaraz, J., Guadalupe González-Ramírez, R., Gustavo Chong Chong, M., Rivera Cadavid, L., & Leal Jamil, G. (2018). Best Practices in Manufacturing Processes. In Best Pr Paulo Davim, J., Zindani, D., Kumar, K., & Kalita, H. (2019). Materials and

actices in Manufacturing Processes. Springer.

 

SME 3480 Operational Research

E-BOOKS

  1. Taha, H. (2018). Operations Research: An Introduction, Global Edition. In Operations Research: An Introduction, Global Edition (Vol. 10). Pearson UK.
  2. Eiselt, H., & Sandblom, C.-L. (2022). Operations Research. In Operations Research (Vol. 3).
  3. Dilip Kumar Adhwarjee. (2021). Theory and Applications of Operations Research. Laxmi Publications Pvt Ltd.
  4. Qazi Shoeb Ahmad, Dr. Shakeel Javed, & Dr.Mohd Vaseem Ismail. (2013). Operations Research. Laxmi Publications Pvt Ltd.

EME 3452 Mechanics of Machines IV

E-BOOKS

  1. Silberschmidt, V., & P. Matveenko, V. (2015). Mechanics of Advanced Materials. In Mechanics of Advanced Materials. Springer.
  2. Schmauder, S., Chen, W., Chen, C.-S., K. Chawla, K., Chawla, N., & Kagawa, Y. (2019). Handbook of Mechanics of Materials. In Handbook of Mechanics of Materials. Springer.
  3. Alrasheed, S. (2019). Principles of Mechanics. In Principles of Mechanics (Vol. 1). Springer Open.
  4. Bedford, A., & M. Liechti, K. (2019). Mechanics of Materials. In Mechanics of Materials (Vol. 2). Springer.
  5. Craig, R., . J., & M. Taleff, E. (2020). Mechanics of Materials. In Mechanics of Materials (Vol. 4). Wiley.
  6. Ping YI, Jun LIU, & Feng JIANG. (2022). Engineering Mechanics. EDP Sciences & Science Press.
  7. Thanh Nam Nguyen. (2020). Mechatronics and Industrial Machines (Issue volume 902). Trans Tech Publications Ltd.

EME 3453 Experimental Stress Analysis

EBOOKS

  1. Petrenko, Alena. Experimental Stress Analysis 51. Zurich, SWITZERLAND: Trans Tech Publications, Limited, 2014.
  2. Wieringa, H. (2012). Experimental Stress Analysis. In Experimental Stress Analysis. Springer.
  3. Palanisamy, S., Chenniappan, S., Thaiyal Nayagi, A., & Mahendran, R. (2020). Basic Electrical and Instrumentation Engineering. In Basic Electrical and Instrumentation Engineering (Vol. 1). Wiley.

EME 3454 Robotics and Automation

EBOOKS

  1. María Ponce-Ortega, J., Ochoa-Barragán, R., & Ramírez-Márquez, C. (2024). Optimization of Chemical Processes. In Optimization of Chemical Processes. Springer.
  2. Kondratenko, Yuriy P., and Arkadii A. Chikrii Vsevolod M. Kuntsevich. Recent Developments in Automatic Control Systems. Aalborg, DENMARK: River Publishers, 2022.
  3. Academies of Sciences, N., g, E., Medicine, and, on Earth and Life Studies, D., Academy of Engineering, N., on Chemical Sciences and Technology, B., & on Chemical Engineering in the 21st Century: Challenges and Opportunities, C. (2022). New Directions for.
  4. Craig, J. (2021). Introduction to Robotics, Global Edition. In Introduction to Robotics, Global Edition (Vol. 4). Pearson UK.
  5. Poole, H. (2012). Fundamentals of Robotics Engineering. In Fundamentals of Robotics Engineering. Springer.
  6. “Introduction to Robotics-Mechanics and Control (Book Review): Business Source.” Accessed August 5, 2024.
  7. Staple, D. (2021). Learn Robotics Programming. In Learn Robotics Programming. Packt.
  8. Cook, D. (2015). Robot Building for Beginners. In Robot Building for Beginners (Vol. 3). Apress.
  9. Voloşencu, C., Küçük, S., & Guerrero and Oscar Valero, J. (2021). Automation and Control. In Automation and Control. IntechOpen.

EME 3455 Power Plants

EBOOKS

  1. Drbal, L., Westra, K., & Boston, P. (2012). Power Plant Engineering. In Power Plant Engineering. Springer.
  2. Reynolds, W., & Colonna, P. (2018). Thermodynamics. In Thermodynamics. Cambridge University Press.
  3. Petrovic, S. (2023). World Energy Handbook. In World Energy Handbook. Springer.
  4. (Center for Chemical Process Safety), C. (2022). Human Factors Handbook for Process Plant Operations: Improving Process Safety and System Performance. In Human Factors Handbook for Process Plant Operations: Improving Process Safety and System Performance (
  5. Taner, T. (2019). Power Plants in the Industry. In Power Plants in the Industry. IntechOpen.
  6. Yang, X., Yang, Z., Wen, H., Gorbov, V., Mitienkova, V., & Serbin, S. (2021). Alternative Fuels in Ship Power Plants. In Alternative Fuels in Ship Power Plants. Springer.
  7. Schmidt, A. (2022). Technical Thermodynamics for Engineers. In Technical Thermodynamics for Engineers (Vol. 2). Springer.
  8. Dehli, M., Doering, E., & Schedwill, H. (2022). Fundamentals of Technical Thermodynamics. In Fundamentals of Technical Thermodynamics. Springer.

 

EME 3456 Internal Combustion Engines

EBOOKS

  1. Pulkrabek, W. (2013). Engineering Fundamentals of the Internal Combustion Engine. In Engineering Fundamentals of the Internal Combustion Engine (Vol. 2). Pearson UK.
  2. Lejda and Pawel Wos, K. (2012). Internal Combustion Engines. In Internal Combustion Engines. IntechOpen.
  3. Genta, G., Morello, L., Cavallino, F., & Filtri, L. (2014). The Motor Car. In The Motor Car. Springer.
  4. Gilles, T. (2017). Automotive Engines. In Automotive Engines (Vol. 8). Cengage.
  5. Baumgarten, C. (2006). Mixture Formation in Internal Combustion Engines. In Mixture Formation in Internal Combustion Engines. Springer.

EME 3458 Production Technology II

EBOOKS

  1. Pulkrabek, W. (2013). Engineering Fundamentals of the Internal Combustion Engine. In Engineering Fundamentals of the Internal Combustion Engine (Vol. 2). Pearson UK.
  2. Lejda and Pawel Wos, K. (2012). Internal Combustion Engines. In Internal Combustion Engines. IntechOpen.
  3. Genta, G., Morello, L., Cavallino, F., & Filtri, L. (2014). The Motor Car. In The Motor Car. Springer.
  4. Gilles, T. (2017). Automotive Engines. In Automotive Engines (Vol. 8). Ce
  5. Baumgarten, C. (2006). Mixture Formation in Internal Combustion Engines. In Mixture Formation in Internal Combustion Engines. Springer.

EME 3459 Vehicle Systems Engineering I

E-BOOKS

  1. Du, M. (2022). Autonomous Vehicle Technology. In Autonomous Vehicle Technology. Springer.
  2. Hjelmstad, K. (2022). Fundamentals of Structural Dynamics. In Fundamentals of Structural Dynamics. Springer.
  3. Nielsen, J., Klomp, M., Bruzelius, F., & Hillemyr, A. (2020). Advances in Dynamics of Vehicles on Roads and Tracks. In Advances in Dynamics of Vehicles on Roads and Tracks. Springer.
  4. Jazar, R. (2019). Advanced Vehicle Dynamics. In Advanced Vehicle Dynamics. Springer.

EME 3460 Plant Engineering II

E-BOOKS

  1. Herz, F., & Nordmann, R. (2020). Vibrations of Power Plant Machines. In Vibrations of Power Plant Machines. Springer.
  2. Jurić, S. (2017). Plant Engineering. In Plant Engineering. IntechOpen.
  3. Drbal, L., Westra, K., & Boston, P. (2012). Power Plant Engineering. In Power Plant Engineering. Springer.

 

 

ECU 3500 Engineering Economics and Entrepreneurship Skills

E-BOOKS

  1. Lasse Torkkeli, E. (2021). Contemporary Issues in International Business and Entrepreneurship. Cambridge Scholars Publishing.
  2. Leo-Paul Dana & Vanessa Ratten. (2019). Societal Entrepreneurship and Competitiveness. Emerald Publishing Limited.
  3. Little, S., M. Go, F., & Shuk-Ching Poon, T. (2017). Global Innovation and Entrepreneurship. In Global Innovation and Entrepreneurship. Springer.
  4. Peris-Ortiz, M., Leal-Millan, A., & L. Leal-Rodríguez, A. (2017). Sustainability in Innovation and Entrepreneurship. In Sustainability in Innovation and Entrepreneurship. Springer.
  5. Carayannis, E., T. Samara, E., & L. Bakouros, Y. (2014). Innovation and Entrepreneurship: Theory, Policy and Practice. In Innovation and Entrepreneurship: Theory, Policy and Practice (Vol. 1). Springer.
  6. Isabel Sánchez-Hernández, M., Carvalho, L., Rego, C., Raquel Lucas, M., & Noronha, A. (2021). Social Innovation and Entrepreneurship in the Fourth Sector. In Social Innovation and Entrepreneurship in the Fourth Sector. Springer.
  7. Mazzarol, T., & Reboud, S. (2019). Entrepreneurship and Innovation. In Entrepreneurship and Innovation (Vol. 4). Springer.
  8. Mitra, J., & Pruthi, S. (2023). Global Entrepreneurship & Innovation. In Global Entrepreneurship & Innovation (Vol. 1). SAGE Publications.
  9. Barney, J., & Hesterly, W. (2021). Strategic Management and Competitive Advantage: Concepts, Global Edition. In Strategic Management and Competitive Advantage: Concepts, Global Edition (Vol. 5). Pearson UK.
  10. David, F., & R. David, F. (2022). Strategic Management: A Competitive Advantage Approach, Concepts and Cases, Global Edition. In Strategic Management: A Competitive Advantage Approach, Concepts and Cases, Global Edition (Vol. 17). Pearson UK.
  11. S Park, C. (2019). Fundamentals of Engineering Economics, Global Edition. In Fundamentals of Engineering Economics, Global Edition (Vol. 4). Pearson UK.
  12. Turuk, M. (2021). Entrepreneurship Contemporary Issues. In Entrepreneurship Contemporary Issues. IntechOpen.
  13. Bögenhold, D., Bonnet, J., Dejardin, M., & Garcia Pérez de Lema, D. (2016). Contemporary Entrepreneurship. In Contemporary Entrepreneurship. Springer.

EME 3500 Law for Engineers

E-BOOKS

Amuta, C. (2017). Theory of African Literature. In Theory of African Literature (Vol. 2). Bloomsbury Publishing UK.

 

 

EME 3501 Systems and Control Engineering

E-BOOKS

  1. Fernández de Cañete, J., Galindo, C., Barbancho, J., & Luque, A. (2018). Automatic Control Systems in Biomedical Engineering. In Automatic Control Systems in Biomedical Engineering. Springer.
  2. Academies of Sciences, N., g, E., Medicine, and, on Earth and Life Studies, D., Academy of Engineering, N., on Chemical Sciences and Technology, B., & on Chemical Engineering in the 21st Century: Challenges and Opportunities, C. (2022). New Directions for
  3. Michael Duncan, T., & A. Reimer, J. (2019). Chemical Engineering Design and Analysis. In Chemical Engineering Design and Analysis (Vol. 2). Cambridge University Press.
  4. Sun, J. (2018). Control Engineering. In Control Engineering (Vol. 1). De Gruyter.
  5. Ikput, N. (2019). Chemical Engineering Problems in Biotechnology. Arcler Press.
  6. Nabil Derbel & Faouzi Derbel. (2019). Systems, Automation, and Control (Issue volume 9). De Gruyter.
  7. Russano, E., & Avelino, E. F. (2019). Introduction to Process Control. Arcler Press.

EME 3502 Project I

E-BOOKS

  1. Hering, H. (2018). How to Write Technical Reports. In How to Write Technical Reports (Vol. 2). Springer.
  2. Grace Ding, A., & Goran Runeson, A. (2020). A ‘Triple Bottom Line’ Approach to Advanced Project Evaluation. Cambridge Scholars Publishing.

 

EME 3503 Systems Reliability Engineering and Plant maintenance

E-BOOKS

  1. Kounis, L. (2020). Reliability and Maintenance An Overview of Cases. In Reliability and Maintenance An Overview of Cases. IntechOpen.
  2. Dui, H., & Wu, S. (2024). Importance-Informed Reliability Engineering. In Importance-Informed Reliability Engineering.
  3. Pham, H., K. Kapur, P., Singh, G., & Kumar, V. (2024). Reliability Engineering for Industrial Processes. In Reliability Engineering for Industrial Processes. Springer.
  4. Li, L., Sun, Y., & Tiniakov, D. (2023). Reliability Engineering. In Reliability Engineering. Springer.
  5. Bracke, S. (2024). Reliability Engineering. In Reliability Engineering. Springer.
  6. Varde, P., Kumar Gupta, V., K. Kankar, P., & Joshi, N. (2020). Reliability and Risk Assessment in Engineering. In Reliability and Risk Assessment in Engineering. Springer.
  7. Agami Reddy, T., & P. Henze, G. (2023). Applied Data Analysis and Modeling for Energy Engineers and Scientists. In Applied Data Analysis and Modeling for Energy Engineers and Scientists (Vol. 2). Springer.
  8. Pham, H., G. Aggarwal, A., & Tandon, A. (2021). Optimization Models in Software Reliability. In Optimization Models in Software Reliability. Springer.
  9. Zubair, M. (2021). Practical Applications in Reliability Engineering. In Practical Applications in Reliability Engineering. IntechOpen.
  10. Ren, Y., Qian, C., Yang, D., Feng, Q., Sun, B., & Wang, Z. (2024). Model-Based Reliability Systems Engineering. In Model-Based Reliability Systems Engineering. Springer.

EME 3504 Finite Element Analysis

E-BOOKS

  1. Qing-Hua, Q. (2021). Trefftz and Fundamental Solution-Based Finite Element Methods. Bentham Science Publishers Ltd.
  2. Wenhui, M. (2020). Reliability Calculations with the Stochastic Finite Element. Bentham Science Publishers
  3. Yu Huang, A., & Thomas Kang, A. (2020). Finite Element Analysis of Prestressed Concrete Structures Using Post-Tensioning Steel. Cambridge Scholars Publishing.
  4. Thai Nguyen, D. (2024). Finite Element Methods. In Finite Element Methods (Vol. 2). Springer.
  5. Dinkler, D., & Kowalsky, U. (2023). Introduction to Finite Element Methods. In Introduction to Finite Element Methods. Springer.
  6. Bilotta,Bhre, U., Antonio. (2021). Finite Element Methods and Their Applications. In Finite Element Methods and Their Applications (Vol. 1). IntechOpen.
  7. Chai, S. (2020). Finite Element Analysis for Civil Engineering with DIANA Software. In Finite Element Analysis for Civil Engineering with DIANA Software. Springer.
  8. Moaveni, S. (2015). Finite Element Analysis: Theory and Application with ANSYS, Global Edition. In Finite Element Analysis: Theory and Application with ANSYS, Global Edition (Vol. 4). Pearson UK.
  9. Kumar Saha, S., Ranjan, H., Sruthi Emani, M., & Kumar Bharti, A. (2019). Electric Fields, Additives and Simultaneous Heat and Mass Transfer in Heat Transfer Enhancement. In Electric Fields, Additives and Simultaneous Heat and Mass Transfer in Heat Transfer
  10. Werkle, H. (2021). Finite Elements in Structural Analysis. In Finite Elements in Structural Analysis. Springer.

EME 3505 Jig and Tool Design

EME 3313 Machine Design II

E-BOOKS

  1. Venkataraman, K. (2021). Design of Jigs, Fixtures and Press Tools. In Design of Jigs, Fixtures and Press Tools (Vol. 2). Springer.
  2. Machine Drawing: Discovery Service for Meru University of Science and Tech. (n.d.). Retrieved July 24, 2024, from

EME 3506 Vehicle Systems Engineering II

E-BOOKS

Du, M. (2022). Autonomous Vehicle Technology. In Autonomous Vehicle Technology. Springer.

Dekoulis, G. (2020). Autonomous Vehicles. In Autonomous Vehicles. IntechOpen.

Guiggiani, M. (2022). The Science of Vehicle Dynamics. In The Science of Vehicle Dynamics (Vol. 3). Springer.

Lenzo, B. (2021). Vehicle Dynamics. In Vehicle Dynamics. Springer.

Schramm, D., Hiller, M., & Bardini, R. (2017). Vehicle Dynamics. In Vehicle Dynamics (Vol. 2). Springer.

  1. Barton, D., & D. Fieldhouse, J. (2024). Automotive Chassis Engineering. In Automotive Chassis Engineering (Vol. 2). Springer.

Du, M. (2022). Autonomous Vehicle Technology. In Autonomous Vehicle Technology. Springer. N. Jazar, R. (2019). Advanced Vehicle Dynamics. In Advanced Vehicle Dynamics. Springer.

EME 3507 Plant Engineering III

E-BOOKS

  1. (Center for Chemical Process Safety), C. (2022). Human Factors Handbook for Process Plant Operations: Improving Process Safety and System Performance. In Human Factors Handbook for Process Plant Operations: Improving Process Safety and System Performance (Vol. 1). Wiley.
  2. Maier, A., Oehmen, J., & E. Vermaas, P. (2022). Handbook of Engineering Systems Design. In Handbook of Engineering Systems Design. Springer.
  3. Aglave, G. s. (2019). Exposure to Boilers: For Practicing Engineers and Students: Vol. Fourth edition. NEW AGE International Publishers.
  4. Tangellapalli, S. (2021). Thermal Cycles of Heat Recovery Power Plants. Bentham Science Publishers Ltd.

EME 3550 Metal Forming Processes

E-BOOKS

  1. Ganesh Marotrao, K., Agrawal, A., & Ravi Kumar, D. (2022). Metal Forming Processes Developments in Experimental and Numerical Approaches. In Metal Forming Processes Developments in Experimental and Numerical Approaches (Vol. 1). Taylor & Francis.
  2. Banabic, D. (2010). Sheet Metal Forming Processes. In Sheet Metal Forming Processes. Springer.
  3. Guo, X. (2022). Flexible Metal Forming Technologies. In Flexible Metal Forming Technologies. Springer.
  4. Öchsner, A. (2024). Plasticity Theory. In Plasticity Theory. Springer.

EME 3551 Environmental Engineering:

E-BOOKS

  1. Tomašić, V., & Zelić, B. (2018). Environmental Engineering. In Environmental Engineering (Vol. 1). De Gruyter.
  2. Haeri, H. (2017). Materials in Environmental Engineering. In Materials in Environmental Engineering (Vol. 1). De Gruyter.
  3. Academies of Sciences, N., g, E., Medicine, and, on Earth and Life Studies, D., on Life Sciences, B., on Engineering and Physical Sciences, D., on Energy and Environmental Systems, B., on Earth Sciences and Resources, B., on Environmental Studies and Toxi
  4. Kumar, S., Kalamdhad, A., & M. Ghangrekar, (2020). Sustainability in Environmental Engineering and Science. In Sustainability in Environmental Engineering and Science. Springer.

EME 3552 Projects II

E-BOOKS

  1. Tomašić, V., & Zelić, B. (2018). Environmental Engineering. In Environmental Engineering (Vol. 1). De Gruyter.
  2. Birolini, A. (2017). Reliability Engineering. In Reliability Engineering (Vol. 8). Springer.

EME 3553 Advanced Manufacturing Systems

E-BOOKS

  1. Akmar Mokhtar and Masdi Muhammad, A. (2019). Industrial Engineering. In Industrial Engineering. IntechOpen.
  2. Boardman, B. (2019). Introduction to Industrial Engine In Introduction to Industrial Engineering. Mavs Open Press.
  3. Ivanov, V., Trojanowska, J., Machado, J., & Soares, F. (2021). Innovations in Industrial Engineering. In Innovations in Industrial Engineering.
  4. Ugural, A. (2020). Mechanical Engineering Design. In Mechanical Engineering Design (Vol. 3). Taylor & Francis.
  5. Xu, J., & Murari Pandey, K. (2021). Mechanical Engineering and Materials. In Mechanical Engineering and Materials. Springer.
  6. Paulo Davim, J. (2018). Introduction to Mechanical Engineering. In Introduction to Mechanical Engineering. Springer.
  7. Anatoly A. Popovich, Aleksander V. Semencha, & Yury Klochkov. (2019). New Materials and Technologies in Mechanical Engineering (Issue volume 822). Trans Tech Publications Ltd.
  8. Kumar. (2022). Mechanical Engineering and Mechatronics Handbook. Mercury Learning and Information.
  9. Idris Saad, Solehuddin Shuib, Noriah Yusoff, Abdul Halim Abdullah, Mohd Hafiz Mohd Noh, & Nur Faiqa Ismail. (2020). Mechanical Engineering and Science (Issue v.Volume 899). Trans Tech Publications Ltd.
  10. Mykola Surianinov. (2020). Actual Problems of Engineering Mechanics: Materials Science and Technologies (Issue Vol. 864). Trans Tech Publications Ltd.
  11. Suwarno, Vivien Djanali, Fahmi Mubarok, & Bambang Pramujati. (2020). Mechanical Engineering: Advanced Materials Processing Technology (Issue Vol. 867). Trans Tech Publications Ltd.

Zied, D. (2021). Mechanical Engineering Technologies and Applications. Bentham Science Publishers Ltd.

EME 3554 Fracture Mechanics

E-BOOKS

  1. A Paipetis & Ferri M.H.Aliabadi. (2020). Advances in Fracture and Damage Mechanics XVIII (Issue XVII). Trans Tech Publications Ltd.
  2. Gross, D., & Seelig, T. (2017). Fracture Mechanics. In Fracture Mechanics (Vol. 3). Springer.
  3. Gdoutos, E. (2020). Fracture Mechanics. In Fracture Mechanics (Vol. 3). Springer.
  4. Baytan Ozmen and H. Ersen Balcioglu, H. (2020). Fracture Mechanics Applications. In Fracture Mechanics Applications. IntechOpen.

EME 3555 Mechanics of Metal Cutting

E-BOOKS

Shi, H. (2018). Metal Cutting Theory. In Metal Cutting Theory. Springer.

Simón Mata, A., Bataller Torras, A., Antonio Cabrera Carrillo, J., Ezquerro Juanco, F., Jesús Guerra Fernández, A., Nadal Martínez, F., & Ortiz Fernández, A. (2016). Fundamentals of Machine Theory and Mechanisms. In Fundamentals of Machine Theory and Mecha.

Sindhwani, R., Sachdeva, A., Dvivedi, A., & Sahu, R. (2021). Recent Trends in Industrial and Production Engineering. In Recent Trends in Industrial and Production Engineering. Springer.

 

Stephenson, D., & S. Agapiou, J. (2018). Metal Cutting Theory and Practice. In Metal Cutting Theory and Practice (Vol. 3). Taylor & Francis.

 

 

EME 3556 Autoelectric and Autotronic Systems

E-BOOKS

  1. Denton, T. (2017). Automobile Electrical and Electronic Systems. In Automobile Electrical and Electronic Systems (Vol. 5). Taylor & Francis.
  2. Denton, T. (2017). Automobile Mechanical and Electrical Systems. In Automobile Mechanical and Electrical Systems ( 2). Taylor & Francis.
  3. Halderman, J. (2021). Diagnosis and Troubleshooting of Automotive Electrical, Electronic, and Computer Systems: Pearson New International Edition . In Diagnosis and Troubleshooting of Automotive Electrical, Electronic, and Computer Systems: Pearson New
  4. Brown, K., Hughes, E., Hiley, J., & McKenzie-Smith, I. (2016). Electrical and Electronic Technology. In Electrical and Electronic Technology (Vol. 12). Pearson UK.
  5. Kawsar Alam, Md. (2019). Electrical and Electronic Properties of Materials. In Electrical and Electronic Properties of Materials. IntechOpen.
  6. Siano, P., Nath Shaw, R., Ghosh, A., Makhilef, S., & L. Shimi, S. (2024). Innovations in Electrical and Electronic Engineering. In Innovations in Electrical and Electronic Engineering. Springer.
  7. Siano, P., Mekhilef, S., & Nath Shaw, R. (2022). Innovations in Electrical and Electronic Engineering. In Innovations in Electrical and Electronic Engineering. Springer.
  8. Thompson, R., & Erjavec, J. (2018). Automotive Techn In Automotive Technology (Vol. 7). Cengage.
  9. Suman Lata Tripathi. (2020). Recent Advancement in Electronic Devices, Circuit and Materials. Nova.
  10. Westcott, S., & Westcott, J. R. (2020). Basic Electronics: Theory and Practice: Vol. Third edition. Mercury Learning & Information.

 

 

 

EME 3557 Plant Engineering IV

E-BOOKS

  1. He, J. (2023). Principles of Engineering Management. In Principles of Engineering Management. Springer.
  2. Jaidev Vyas, J., Gopalsamy, B., & Joshi, (2018). Electro-Hydraulic Actuation Systems. In Electro-Hydraulic Actuation Systems. Springer
  3. Akmar Mokhtar and Masdi Muhammad, A. (2019). Industrial Engineering. In Industrial Engineering. IntechOpen.
  4. Boardman, B. (2019). Introduction to Industrial Engineering. In Introduction to Industrial Engineering. Mavs Open Press.
  5. Dooley, J., & Cunningham PE, R. (2021). Career Paths: Industrial Engineering. In Career Paths: Industrial Engineering (Vol. 1). Express Publishing.
  6. Ivanov, V., Trojanowska, J., Machado, J., & Soares, F. (2021). Innovations in Industrial Engineering. In Innovations in Industrial Engineering. Springer.
  7. aulo Davim, J. (2021). Mechanical and Industrial Engineering. In Mechanical and Industrial Engineering. Springer.
  8. Abdus Salam, Md. (2022). Fundamentals of Pneumatics and Hydraulics. In Fundamentals of Pneumatics and Hydraulics. Springer.

 

 

    JOURNAL

     

    Wiley

    1. Advanced Functional Materials
    2. Advanced Materials
    3. Advances in Materials Science and EngineeringAdvances in Meteorology
    4. Advances in MeteorologyV
    5. Advances in CivilEngineering
    6. Advances in MaterialsScience and EngineeringAdvances in Materials Science andEngineeringAIChE Journal
    7. ce/papers
    8. Chemie Ingenieur Technik
    9. Complexity
    10. Computer Applications in Engineering Education
    11. Computer Applications in EngineeringEducation  
    12. Computer Applications in EngineeringEducation
    13. Computer-Aided Civiland Infrastructure EngineeringEarly View
    14. Computer-Aided Civiland Infrastructure Engineering
    15. Deep Underground Science and EngineeringVolume 1, Issue 1
    16. Digest of Middle East StudiesEarthquake Engineering & Structural Dynamics
    17. Earthquake Engineering and Resilience
    18. Earthquake Engineering& Structural Dynamics
    19. Ecohydrology
    20. Energy Technology
    21. Environmental Toxicology and Chemistry
    22. Fatigue & Fracture of Engineering Materials& Structures
    23. Food Bioengineering
    24. Global Challenges
    25. Global Change Biology
    26. Global Networks
    27. Greenhouse Gases: Science and Technology
    28. GroundwaterVolume 61, Issue 6
    29. Hydrological ProcessesInternational Journal of Aerospace Engineering
    30. International Transactions on Electrical Energy Systems
    31. Journal of Advances in Modeling Earth Systems
    32. Journal of Contingencies and Crisis Management
    33. Journal of Engineering Education
    34. Journal of Flood Risk ManagementJournal of Geophysical Research: Earth Surface
    35. Journal of Nanomaterials
    36. Journal of Research in Science Teaching
    37. Journal of Software: Evolution and ProcessJournal of EngineeringEducation  
    38. Journal of EngineeringEducationMathematical Problems in Engineering
    39. Mobile Information Systems
    40. New Directions for Teaching and LearningEarly View
    41. New Directions for Teaching and LearningEarly View
    42. New PhytologistPolicy Studies JournalVo
    43. Review of Policy Research
    44. River Research and Applications
    45. School Science and Mathematics
    46. Scientific ProgrammingStructural Control and Health MonitoringVolume 2025, Issue 1
    47. Systems EngineeringThe British Journal of Sociology
    48. The Journal of Engineering
    49. Water Resources ResearchVolume 56, Issue 5Earth Surface Processes and Landforms
    50. Water Resources Research
    51. Wireless Communications and Mobile Computing

    IEEE

    1. Chinese Journal of Electronics
    2. Fuzzy Information and Engineering
    3. Geophysical Journal International
    4. IEEE Access
    5. IEEE Communications Surveys & Tutorials
    6. IEEE Control Systems Letters
    7. IEEE Internet of Things Journal
    8. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
    9. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
    10. IEEE Journal of Translational Engineering in Health and Medicine
    11. IEEE Open Journal of Systems Engineering
    12. IEEE Open Journal of the Communications Society
    13. IEEE Photonics Journal
    14. IEEE Transactions on Automatic Control
    15. IEEE Transactions on Automation Science and Engineering
    16. IEEE Transactions on Education
    17. IEEE Transactions on Engineering Management
    18. IEEE Transactions on Instrumentation and Measurement
    19. IEEE Transactions on Neural Networks and Learning Systems
    20. IEEE Transactions on Neural Systems and Rehabilitation Engineering
    21. IEEE Transactions on Neural Systems and Rehabilitation Engineering
    22. IEEE Transactions on Quantum Engineering
    23. IEEE Transactions on Systems, Man, and Cybernetics: Systems
    24. IEEE Transactions on Visualization and Computer Graphics
    25. IEEE Transactions on EngineeringManagement
    26. Journal of Intelligent and Connected Vehicles
    27. Journal of Modern Power Systems and Clean Energy
    28. Journal of Social Computing
    29. IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part C
    30. IEEE Transactions on Education
    31. IEEE Transactions on Industrial Electronics
    32. IEEE/ASME Transactions on Mechatronics
    33. IEEE Access
    34. IEEE Transactions on Circuits and Systems
    35. IEEE Transactions on Automatic Control
    36. IEEE Transactions on Information Theory
    37. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
    38. IEEE Transactions on Plasma Science
    39. IEEE Transactions on Applied Superconductivity
    40. IEEE Control Systems Letters
    41. IEEE Transactions on Magnetics
    42. IEEE Open Journal of the Industrial Electronics Society
    43. IEEE Transactions on Industrial Informatics
    44. IEEE Robotics and Automation Letters
    45. IEEE Journal of Emerging and Selected Topics in Industrial Electronics
    46. IEEE Transactions on Control Systems Technology
    47. IEEE Transactions on Vehicular Technology
    48. IEEE Transactions on Reliability
    49. IEEE Transactions on Device and Materials Reliability
    50. IEEE Transactions on Neural Networks
    51. IEEE Sensors Journal

     

     

     

     

    Coming Soon …

    Coming Soon …